Spacelabs 90207 Operation Manual page 11

Modem Speed and Compatibility Issues
The 90207 and 90217 operate Hayes-compatible modems only. You can identify your model type by
plugging the communications cable into your 90207/90217 unit and looking at the numbers on the
display. The acceptable modem types and maximum speeds of 90207/90217 units are summarized
below:
MODEL TYPE
Older 90207
Newer 90207
Older 90217
Newer 90217
Connection Procedure
1. If you are using an older 90207 with a 1200 modem, set the switches on the modem as follows:
2. Connect the serial port cable (P/N 012-0096-00) between the monitor and the modem.
• If call waiting or call forwarding are options on a telephone used to transfer data,
!
ensure that both are deactivated or modem communications may be interrupted.
In addition, telephone systems such as CBX or PBX can cause interference with
the modem or the modem can cause interference with the switching system.
To initialize the monitor for remote connection:
1. Contact the base station by telephone (for remote operation only).
2. Ask the base station operator to initialize the monitor. Give the following information to the
operator:
• Patient's name
• Patient ID number
• Whether monitor display is to be active or not
• Time of day (12- or 24-hour format)
• Whether to display measurement (systolic/diastolic and heart rate)
MODEMS
MAX SPEED
ACCEPTED
1200 1200 only
1200 Any Hayes
up to 9600 up to 9600
9600 Any Hayes
SETTING AT
SWITCH # MONITOR SITE
1 down
2 up
3 down
4 down
5 down
6 up
7 up
8 down
9 up
10 up
Operation
DISPLAY
9999
1999/9999
2999/9999
0999/9999
1-5