Rack Dry(Optional) - Samsung DV331AE Series User Manual

RACK DRY(OPTIONAL)

Installing the drying rack
1. Open the dryer door.
2. Position the drying rack in the tumbler, placing the front lip of the drying rack on the top of
the lint filter.
3. Place the rear legs in the two recessed areas of the dryer's back wall, then push down the
middle of the drying rack to fix.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the dryer door.
6. Use only the Time Dry(Temp selection - Extra Low) cycle. Select the time according to the
moisture and weight of the items. Start the dryer. It may be necessary to reset the timer if a
longer drying time is needed.
SUGGESTED ITEMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items
and lead to a fire hazard.
WARNING
Drying Rack is not supplied in this model. The Drying Rack is optional. You can purchase it
through a service center. (Part code :DC61-01522A)
DV331AEW-03026B_EN_v1.indd Sec5:25 DV331AEW-03026B_EN_v1.indd Sec5:25
SUGGESTED TEMP. SETTINGS
Heat (Extra Low)
Heat (Extra Low)
Operating Instructions, Tips _25
2011-07-01 2011-07-01 5:01:41 5:01:41