Rack Dry (Optional Part) - Samsung DV361EWBEWR/A3 User Manual

RACK DRY (OPTIONAL PART)

Installing the drying rack
1. Open the Dryer door.
2. Position the drying rack in the tumbler, placing the front lip of the drying rack on the top of
the lint filter.
3. Place the rear legs in the two recessed areas of the dryer's back wall, then push down the
middle of the drying rack to fix.
4. Place the items to be dried on the rack, leaving space between them so air can circulate.
5. Close the Dryer door.
6. Use the Time Dry cycle. Select the time according to the moisture and weight of the items.
Start the Dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS
Washable sweaters
(block to shape and lay flat on rack)
Stuffed toys
(cotton or polyester fiberfilled)
Stuffed toys
(foam or rubber-filled)
Foam rubber pillows
Sneakers
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the item and
lead to a fire hazard.
WARNING
Drying Rack is not supplied in this model. The Drying Rack is optional. You can purchase it
through a service center. (Part code : DC61-01522A)
DV361_363-02810F_EN.indd Sec5:23 DV361_363-02810F_EN.indd Sec5:23
SUGGESTED TEMP. SETTINGS
Extra Low (Time Dry Cycle)
Extra Low (Time Dry Cycle)
Air Fluff
Air Fluff
Air Fluff
operating Instructions, tips _23
2012-06-07 2012-06-07 7:56:06 7:56:06