Table of Contents
Advertisement
Advanced Functions
Recording Function
You can record sound of the CD, the Radio
Broadcasting or sound from the external source into
the USB storage device.
1.
Switch the system on by pressing the
POWER button.
2.
Connect the external USB storage device you want
to record to the USB jack (
3.
Play a Disc, adjust the Radio frequency or
connect the external source to the main unit.
CD (See page 20)
Press the
F(
) button on the main unit to select
the DVD/CD function.
Press the
OPEN/CLOSE button to open the Disc
Compartment.
Insert a CD and press the
close the Disc Compartment.
Use the CD selection (
the desired song.
Tuner (See page 28)
Press the
F(
) button on the main unit to select the
FM function.
Adjust the Radio frequency you want to record.
External Source (See page 14)
Connect an External Component/MP3 player to the
main unit.
Press the
FUNCTION button to select the AUX .
Play a song from the external device.
4.
Press the
USB REC button to start recording.
CD
"TRACK RECORDING" is displayed and CD
recording starts.
Press and hold the
recording the all tracks of Disc.
"FULL CD RECORDING" is displayed.
If you record the MP3 Disc, the file is copied into the
USB device totally.
"PROCESSING XX%"" is displayed on TV. When
the recording is done, "STOP" will be displayed.
If there is the same file name, "FILE EXISTED" is
displayed on TV, and the function is canceled.
Tuner/External Source
"RECORDING" is displayed.
34
English
B
) of the main unit
OPEN/CLOSE button to
# or $ ) button to select
USB REC button to start
To stop recording, press the
5.
and then automatically create and save as the
MP3 fi le.
After the recording, a directory named
"RECORDING"(CD), "CD COPY"(MP3 CD), "TUNER
RECORDING" or "AUX RECORDING" will be created
in your device.
✎
NOTE
Do not disconnect the USB or the AC Cord during the
recording as this may cause fi le damage.
If you disconnected USB device during the recording,
the main unit will be power off and you may not delete
the recorded fi le, In this case, please connect the USB
device to the PC and backup the USB data on the PC
fi rst and then format the USB device.
When the USB memory is not enough, it will be
displayed "NOT ENOUGH MEMORY".
The recording works if the USB device or the HDD is
formatted in the FAT fi le system. (The NTFS fi le system
is not supported.)
When you use CD high speed search function, the CD
recording can't work.
Sometimes, the recording time may be longer with
some USB devices. (See page 8)
When the CD recording, the EQ functions can not work
and automatically change to OFF.
When the CD recording, the REPEAT function can not
work and automatically changes to OFF.
You can not record the radio when searching or no
available frequencies in the Tuner mode.
Note that setting the input level too loud when recording
music from an external device through the AUX and
USB channel may introduce noise into the recording. In
that case, lower the external device's volume level.
The audio signal will not be output during USB
recording of the CD.
When HDMI AUDIO is set to On, the USB Recording
function is not supported.
You can recording Divx.(max. 300M) fi le and JPEG fi le.
Recording Speed
1.
Each time you press and hold the
SPEED button on the remote control, the
recording speed will change as follows:
RECORDSPD x 1 RECORDSPD x 3
While the Tuner or External Source is recording, the
recording speed does not supported.
When you select RECORDSPD x 3, the audio
sound will not be output.
STOP ( ) button
CD REC
Advertisement
Table of Contents
