FM Antenna (supplied)
1.
Connect the FM antenna supplied to the FM Antenna jack.
Slowly move the antenna wire around until you fi nd a location where reception is good, then fasten it
2.
to a wall or other rigid surface.
✎
NOTE
This product does not receive AM broadcasts.
You can connect a set of headphones to your micro component system so that you can listen to music or
radio programmers without disturbing other people in the room. The headphones must have a 3.5ø jack or
an appropriate adapter.
Connect the headphones to the PHONES jack on the rear panel.
1.
• The loudspeakers are no longer used to output the sound.
✎
NOTE
Prolonged use of headphones at a high volume may damage your hearing.
Connecting the FM Antenna
Connecting Headphones
15
English