Recording Function - Samsung MX-J630 User Manual

Mini hi-fi component audio system
Hide thumbs Also See for MX-J630:
Table of Contents

Advertisement

Recording Function

You can record from a CD, radio broadcast, or an
external source to a USB storage device.
1. Connect an external USB storage device to the
USB 2 (
2. Play a disc, tune to a station, or connect an
external source to your product.
CD
• Press the CD/Bluetooth button on the main
unit or press the CD button on the remote
control to select the MP3/CD function.
• Press the OPEN/CLOSE button to open the disc
tray.
• Insert a CD and press the OPEN/CLOSE button
to close the disc tray.
• Use the CD selection buttons ( [ or ] ) to
select the desired song.
Tuner
• Press the TUNER/AUX button on the main
unit or press the TUNER button on the remote
control to select the TUNER function.
• Tune to a station you want to record.
External Source
• Connect an External Component/MP3 player
to your product.
• Press the TUNER/AUX button on the main unit
or press the AUX button on the remote control
to select the <AUX> input.
• Play a song from the external device.
USB 1
• Connect a USB device to the USB 1 jack of your
product
• Press the
press the USB button on the remote control to
select the USB 1.
• Play a song from USB 1.
3. Press the USB REC button to start recording.
CD
• "TRACK RECORDING" is displayed and CD
recording starts.
• Press and hold the USB REC button to start
recording all tracks on the disc. "FULL CD
RECORDING" is displayed.
MP3-CD, USB 1
• Press the USB REC button. The currently
playing file is copied onto the USB 2 device.
• Press and hold the USB REC button. All the
files in the current folder are copied onto the
USB 2 device.
COPY: "CHECK""START""COPY XX""COPY END"
is displayed. When the recording is done,
"STOP" will be displayed.
• If there is a duplicate file name, "FILE EXIST" is
displayed, and the function is canceled.
Tuner /External Source
• Tuner: "TUNER RECORDING""RECORD"
• External Source : "AUX RECORDING""RECORD"
) jack on your product.
button on the main unit or
4. To stop recording, press the STOP ( @ ) button. The
product automatically creates and saves recorded
files in .MP3 format (SAM-XXXX.MP3).
5. To remove the USB device safely, press the
STOP ( @ ) button once again. After recording, a
directory named "RECORDING(DISCxxxx)"(FULL
CD RECORDING), "RECORDING"(TRACK
RECORDING), "CD COPY"(MP3 CD/USB), "TUNER
RECORDING" or "AUX RECORDING" is created on
your USB device.
• Do not disconnect the USB or the AC Cord
during recording as this may cause damage to
the file.
• If you disconnect the USB device during a
recording, the unfinished recording file may get
damaged and cannot be deleted. If this occurs,
please connect the USB device to a PC, back up
the data stored in the USB, and then format it.
• When the USB memory has insufficient free
space, the system will display "NOT ENOUGH
MEMORY".
• The USB device or HDD you are recording to
must be formatted in the FAT file system. The
NTFS file system is not supported.
• When you use the CD high speed search
function, CD recording is not available.
• Sometimes, the recording time may be longer
with some USB devices.
• In the My List or Auto Change mode, you can't
use the recording function.
• The preset equalizer and user equalize are not
available during a recording.
• The GIGA SOUND and FOOTBALL functions are
set to "OFF" automatically and are not available
during a recording.
• The REPEAT function is set to "OFF" automatically
and is not available during a recording.
• You cannot record the radio when searching or
when no available station is found in the Tuner
mode.
• Note that setting the input level too loud when
recording music from an external device through
the AUX or USB channel may cause noise in
the recording. If this occurs, lower the external
device's volume level.
• The maximum TUNER/AUX recording time is 5
hours.
• If USB2 has no USB device connected, and you
press the USB REC button, "USB2 NOT READY" is
displayed.
• If the Hi-Fi Component does not support the USB
device connected to USB2, when you press the
USB REC key, "NOT SUPPORTED USB DEVICE" is
displayed.
17
16
English
English

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mx-j730

Table of Contents