Connections
FM Antenna
(supplied)
1. Connect the FM antenna (supplied) to the FM Antenna jack.
2. Slowly move the antenna wire around until you find a location where reception is good, then fasten it
to a wall or other rigid surface.
✎
NOTE
This product does not receive AM broadcasts.
You can connect a set of headphones to your micro component system so that you can listen to music or
radio programmers without disturbing other people in the room. The headphones must have a 3.5ø jack or
an appropriate adapter.
1. Connect the headphones to the PHONES jack on the front panel.
• The speakers have no sound output.
✎
NOTE
Prolonged use of headphones at a high volume may damage your hearing.
Connecting the FM Antenna
ONLY FOR
SERVICE
SPEAKERS
OUT( 8 )
Connecting Headphones
AUX IN
P
Y
B
COMPONENT
OUT
P
R
VIDEO OUT
5V
500mA
PHONES
15
English