Electrolux EXH09HV1W User Manual page 9

Remote Control Description
Models with Cold-Plasma function
2
1
4
5
Fan
7
Timer
8
Timer f
9
Swing
ON/OFF Button
Press this button to turn the air conditioner
ON or OFF.
Mode Button
By pressing this button, AUTO, DEHUMIDIFY,
FAN, COOL, and HEAT (COOL only model
has no HEAT feature) mode can be selected
progressively.
AUTO mode is default while power on.
Under AUTO mode, the initial value is 23°C;
Under HEAT mode, the initial value is 28°C;
Under other modes, the initial value is 25°C.
AUTO DEHUMIDIFY
Light Button
Press this button to switch the indicating lights
of the indoor unit ON or OFF.
The normal condition at start up is ON.
Fan Button
By pressing this button, Auto, Low, Medium and
High speed can be progressively selected.
When the unit is turned on, Auto fan speed is
the default.
In DEHUMIDIFY mode, the fan speed is
Low speed.
3
Mode Light
6
Turbo Healthy
13
On Temp 11
12
Of
Clock
I feel Eco
FAN COOL HEAT
Turbo Button
Press this button in COOL or HEAT mode to put
the fan into the high speed Turbo mode and the air
conditoner will work at maximum power.
Press again to cancel this function.
Healthy Button
Press this button to turn the Cold-Plasma function
ON or OFF.
+ X-Fan Buttons
Press the Turbo button and Healthy button at the
same time (for 3 seconds), the X-FAN function will
be activated. After the unit is turned off the indoor
fan will continue operation for 10 minutes to dry
the indoor unit prevent from bacteria and mildew
growing.
Timer On Button
Press this button to set the start time.
Timer Off Button
Press this button to set the stop time.
Swing Button:
Press this button, the louver will swing up and
down automatically. Press again to cancel it and
the louver will stay at its last position.
I Feel Button:
Press this button, the remote control will send the
temperature information to the indoor unit every
2 minutes. The unit will operate to reach the set
temperature at the location of remote control.
Presss again to cancel this function.
Control Button:
Forward
Press the
setting.
Press the
setting.
In Timer On/Off or Clock functions, use these
buttons to set the clock or timer adjustment.
Clock Button:
Press this button and the Clock symbol
blink. You can press Control buttons
set the time you want.
Temp (Temperature) Button
Press this button to change the remote control
display of the set temperature to the room
temperature.
Eco (Economy) Button
Press this button to start the Eco operation.
This is ideal for the users to use while sleeping.
Press again to cancel the function.
Note:
Under heating mode, press Temp and Clock
at
buttons to turn on the function of heating the
indoor room temperature to 8°C.
Backward
button to increase the temperature
button to decrease the temperature
will
and to
9