Henny Penny 8000 Computron Information

4-1. INFORMATION MODE
FUNCTIONS
103

SECTION 4. INFORMATION MODE

This mode gathers and stores historic information on the
fryer and operator's performance. Press
at the same time and "*INFO MODE*" shows on display.
Press
view the statistics within each step. Information Mode is
intended
following information:
1. E-LOG - last 10 errors and time they occurred
2. LAST LOAD - information about the most recent Cook
Cycle, or the cycle presently in progress
3. DAILY STATS - information for the last 7 days
4. REVIEW USAGE- information accumulated since the
last time this data was manually reset
5. INP A_VHDSF_M - provides test of fryer inputs
6. OUTP - shows the state of heater and pressure
7. OIL TMP - temperature of shortening
8. CPU TMP - temperature of PC board
9. ANALOG - status of controller's a-to-d converter
10. AMPS - the present amp readings to heaters
1. E-LOG (error code log)
Press
display. This is the present date and time.
Press
error code information)" shows in display. This is the latest
error code that the controls recorded.
or to access the steps and press
for technical use, but the operator can view the
Press and hold to exit Information Mode at
any time, or after 2 minutes, controls automatically exit
back to normal operation.
and "1A. (date & time) *NOW*" shows in
and if an error was recorded, "1B. (date, time, and
Model 8000 Computron
and
to
4-1