Wiselink Pro-Dlna; Setting The Dlna Network - Samsung Plasma TV User Manual

WISELINK Pro-DLNA

Setting the DLNA Network

DLNA allows you to watch videos and pictures saved on your PC on your TV through a network connection in
Wiselink Pro mode. This removes the need to copy them to a USB storage device and then connect the device to
your TV. To use DLNA, the TV must be connected to the network and the DLNA application must be installed on
your PC.
Network Connections Diagram
TV Rear Panel
LAN Cable
1
Connecting to the Network
1 When connecting to the network is complete, set up the network on the TV (see page 110).
A Wireless Internet connection does not support DLNA.
➣
The first 3 digits (subnet address) of the IP addresses of the TV and the PC must be the same (e.g. IP
➣
Address: 123.456.789.XX )
2 Run a Network Test to check the network settings (see page 113).
External Modem
(ADSL/VDSL/Cable TV)
Modem Cable

2 LAN Cable
PC
English - 5
1 Connect the [LAN] port on
the rear panel of the TV to
The Modem Port on
the external modem with a
the Wall
LAN Cable.
2 Connect the PC to which the
DLNA PC Share Manager
program will be installed and
the external modem using a
LAN cable.
 Connect the LAN port on the
wall and the external modem
with a Modem Cable.