Repeating One Or All Tracks On The Compact Discs; A-B Repeat Playback; Function To Skip Through 10 Track At A Time; Last Memory Function - Samsung MAX-A54U User Manual

Repeating One or All Tracks
on the Compact Discs
ENG You can repeat indefinitely:
A specific track on a compact disc.
All tracks on the compact disc selected.
All discs loaded in the carrousel
1
To repeat... Press REPEAT on the Remote
control once or more times
until...
The current track indefinitely REPEAT 1 is displayed, and the
"1" always flashes.
The selected disc REPEAT 1 is displayed
All discs loaded REPEAT ALL is displayed
2
When you wish to stop the Repeat function, press REPEAT until
ALL or 1 is displayed, or press
.
+10 DEMO DIMMER
SHUFFLE REP A-B REPEAT
1,2
P.SOUND P.BASS
2
USB/MP3-CD/CD

A-B Repeat Playback

You can repeatedly play back a designated section of a CD.
1
Press the REP A-B button at the beginning of desired part.
START shows.
2
Press the REP A-B button at the ending of desired part.
END shows and section repeat is played 3 times.
Then it plays normal.
ON/OFF
SLEEP MO/ST MEMORY
+10 DEMO DIMMER
SHUFFLE REP A-B REPEAT
P.SOUND P.BASS
12
Function to skip through 10
tracks at a time
Press the +10 button briefly while playing back a
CD and MP3/WMA-CD . The track 10 tracks after the
current one will then be played back.
Example: If you want to select track 43 during playback of track
5, press the +10 button four times, and then press
the button three times .
5 10 20 30 40 41 42
ON/OFF
SLEEP MO/ST MEMORY
+10 DEMO DIMMER
SHUFFLE REP A-B REPEAT
P.SOUND P.BASS
USB/MP3-CD/CD

Last Memory Function

(This function is only available during playback of MP3/WMA-CD.)
When MP3/WMA-CD playback is selected again after your
CD player has been stopped or turned off, this function
allows playback from the start of the track that you last
listened to.
Press the PROGRAM/SET button while your MP3/WMA-CD is
being played . The LAST ON and LAST OFF may be repeatedly
selected.
OPEN/ DISC
POWER
CLOSE SKIP
TIMER TIMER/CLOCK PROGRAM/SET
ON/OFF
SLEEP MO/ST MEMORY
+10 DEMO DIMMER

Programming the Order of CD Playback

(This function is not available during playback of an MP3/WMA-CD.)
You can decide:
The order in which you listen to the tracks on the discs loaded
Which tracks you do not wish to listen to
You can program up to 24 tracks.
You must stop the compact disc player before selecting the tracks.
This feature can be combined with the Repeat function.
43
1
If the CD function is selected, stop the player by pressing
2
Load the selected CDs.
3
Press ENTER/PRGM..
Result: The following indications are displayed:
(01 = Program no., PR1 = Disc no., – – = Track no. on the disc)
4
If necessary, select the disc containing the required track by pressing
the corresponding DISC (1, 2, 3) button.
5
Select the required track by turning the MULTI JOG knob:
To the left to move back through the tracks
To the right to move forward through the tracks
6
Press ENTER/PRGM. to confirm your selection.
Result: The selection is stored and
7
To select other tracks, repeat Steps 4 to 6.
8
Press CD/MP3-CD ( ) to listen to the track selection in the order
programmed.
9
To...
Listen to the current track again
Listen to the previous track
Listen to the next track
Skip forwards or backwards one
or more tracks
10
To cancel the selection, press .
Once if the compact disc player is stopped
If you open the compartment, the selection is cancelled.
If you select the number of a disc which is not loaded or a
track which does not exist on the CD, the selection skips to the
next programmed track.
You can also use the / buttons to select the required
tracks in step 5, 9.
.
is displayed.
Turn the MULTI JOG knob...
One notch to the left
Two notches to the left
One notch to the right
The appropriate number of
notches to the right or to the
left
ENG
4
5,9
3,6
8
5,9 1, 1 0
5,9
13