Repeating One or All Tracks
on the Compact Discs
You can repeat playing CD indefinitely.
CD containing a specific track.
●
Whole tracks of a selected CD.
●
1. Press REPEAT button.
Each time you press the REPEAT button, the
repeat mode will change as following:
MP3 : R OFF ;R TRK ; R DIR ; R DISC; R RAN.(MM-E320)
MP3 : OFF;TRACK; DIR; ALL; RANDOM .(MM-E330)
CD : R OFF ;R TRK ; R ALL; R RAN .(MM-E320)
CD : OFF ;TRACK ; ALL; RANDOM .(MM-E330)
• Depending on your product,the repeat mode
display maybe different.
2. When you wish to stop the Repeat function, press
REPEAT until "R OFF(OFF)" is displayed.
• R OFF(OFF) : Cancels Repeat Playback.
• R TRK(TRACK) : Repeatedly plays the
• R DIR(DIR) : Repeatedly plays all tracks in the
• R DISC : Repeatedly plays the entire disc
• R ALL(ALL) : Repeatedly plays the all tracks in
• R RAN(RANDOM) : Plays tracks in random
Searching for a Specific Music
Passage on a CD
When listening to a compact disc, you can quickly
search for a specific music passage on a track.
To search for
- Forwards ...............
- Backwards ............
Press and hold the [/] button on the top panel
to automatically scan for a track.
10 Skip Track
Press the +10 button while in playback mode.
This will skip the tracks as many as 10 from the current
track.
8
Downloaded From Disc-Player.com Samsung Manuals
English
selected track.
selected folder.
the disc.
order.
Press
) button
( button
CD Programming
(This function is not available during playback of
an MP3/WMA-CD.)
You can program the playback order of up to 24
●
tracks of your choice.
However, you must stop playing the CD before
●
selecting tracks.
1. While in CD playback mode, press STOP(@) to
stop playing the CD.
2. Press the ENTER button to display the
message below:
(01= program number, --= track number)
3. Use [ or ] to move to a desired track.
• Press [ to move to the previous track.
• Press ] to move to the next track.
4. Press the ENTER button to confirm your
selection,the selection is stored and
displayed.
5. To select a different track, following the steps 3
to 4 above.
6. Press PLAY (p) to play the programmed tracks.
7. Press STOP (@) to stop playing the programmed
tracks, Press STOP (@) again to cancel playing
the programmed tracks.
• If you open the disc tray or turn off the
product, your programming will be canceled
Check and Edit the Programmed
Tracks
You can check a list of programmed tracks and edit
them as you want.
1. If a programmed track is being played, press
STOP (@) once.
2. Press ENTER twice to display the message
below:
(C=Check, 01= program number)
If a total of 24 tracks are already programmed, "C"
will be displayed rather than "P" in the display.
3. Repeat pressing ENTER until the desired track is
displayed.
4. Press [ or ] to select a different track.
5. Press ENTER to confirm your selection.
6. To play the programmed tracks, press PLAY (p).
.