Attention! - Establishing The Audio Connection To The Tv Card - TerraTec Cinergy 200 TV Installing Hardware And Drivers

an adapter that lets you switch between both directions. You can find such products in vari-
ous specialty shops.

Attention! - Establishing the audio connection to the TV card.

When connecting external devices using the video-in or S-video-in jack, you have to be careful
that only video signals are transferred to these jacks—not sound signals. Because of this, you
will need a second cable connection, which leads from the audio-out jacks of the external
device to the Line-in jack of your sound card. If you do not establish this connection, it will not
be possible to record sound when recording video sequences from an external device!
The audio connection to the external device is most easily established using a Y cable, which
you can purchase in an electronics or HiFi equipment shop.
Audio Out
Connect the audio as follows:
1. Plug both cinch jacks of the Y cable into the audio-out jacks of the external device.
2. Plug the small stereo jack of the Y cable into the Line-in jack of your sound card.
Note: This audio connection is required if you want to be able to record sound when re-
cording video sequences from your external device. Also, we highly recommend taking a look
at the section entitled "Important settings for sound card owners." (see page 19) to make sure
your sound card is configured correctly for recording a video sequence with sound.
Cinergy TV Hardware (English)
Y cable
23