Connecting External Devices To The Tv Card; Connecting An External Device Equipped With Antenna-Out - TerraTec Cinergy 200 TV Installing Hardware And Drivers

Connecting external devices to the TV card.

This chapter tells you everything you need to know about connecting external devices, like
video recorders, video cameras and satellite receivers.
Generally, you can connect most external devices to the TV card using the antenna-in, com-
posite-in and S-video-in jacks. Which jack you need to use depends on the model of the
device that you are trying to connect. So, first check which outputs your device is equipped
with. Take a look at the following illustrations:
Antenna Out Video-out (composite) S-video-out Scart Out
Compare the illustrations with the connection jacks on your device. Then, to connect the
device, follow the instructions of one of the following sections.

Connecting an external device equipped with antenna-out.

You can connect an external device with an antenna-out jack to the antenna-in jack of the
Cinergy using a common, 75 Ohm antenna cable.
75 Ohm antenna cable
Tip: Usually it is recommended that the antenna cable connection be used only for connecting
an antenna or cable network. If other terminals are present (composite, S-video or Scart
outputs), we recommend using them because they provide better quality.
20 Cinergy TV Hardware (English)