Important Settings For Sound Card Owners - TerraTec Cinergy 200 TV Installing Hardware And Drivers

Important settings for sound card owners.

If you have connected the Audio output of the TV card to the Line-In input of your sound card
using the provided cinch-cinch cable, you will have to make certain settings in the mixer for
the sound card so that you can hear and record the TV/Video tone.
To do so, proceed as follows:
1. Double-click the volume control icon illustrated as a speaker on the taskbar.
2. Be sure that the "Mute" option under the "Line-In" slider is not checked and that the
"Line-In" slider is not at the bottom of its range.
This makes sure you will be able to hear the tone of the TV signal through your system and
control the volume. Other settings are required for recording (see instructions below):
3. Select the "Options\Properties" menu item.
4. Set the "Adjust volume for" option to "Recording". Confirm your choice by clicking the
"OK" button.
5. Now enable the check box below the Line-In slider and move the slider itself to its middle
position. By checking the check box, you define the Line-In input of your sound card as a
recording input source. This is essential if you want to record a video sequence with
sound and want to use the sound card input to do so.
Note: It is also possible to record sound for a TV image using a recording driver provided
particularly for this purpose. The advantage of recording using this driver is that it guaran-
tees that the picture and sound are perfectly in sync. Technically, the method using the audio
cable described above cannot guarantee perfect synchronization.
Note: This driver is available only in the TerraTec TV application. If you use other programs,
the sound can be recorded via the sound card only.
This completes the configuration of the sound card settings and you can now close the mixer!
Cinergy TV Hardware (English) 19