Connecting An External Device With Video Output (Composite); Connecting An External Device With S-Video Output - TerraTec Cinergy 200 TV Installing Hardware And Drivers

Connecting an external device with video output (composite).

You can connect an external device with a video-out jack (composite) using a cinch/cinch
cable to the video-in jack (composite) on the TV card.
Use such a cinch cable to connect a device equipped with a video-out jack (composite).
Connect the cable as described below:
1. Connect the cinch (RCA) cable to the video output (composite) of the external device and
the video input (composite) of the TV card.
2. In the TV software, select the "Composite" option as incoming signal, so that the video
image of the external device can be displayed (see For further information on the TV soft-
ware, please refer to the documentation (autostarter à documentation à TV software).
Note: When using the composite video input, be sure to read the section entitled "Attention! -
Establishing the audio connection to the TV card." on page 23.

Connecting an external device with S-video output.

You can connect an external device with an S video-out socket using a S video/S video cable
to the TV card. (please refer to the following illustration).
Connect the cable as described below:
1. Connect the S video cable to the S video output of the external device and the S video
input of the TV card.
2. In the TV software, select the "S-video" option as incoming signal, so that the video image
of the external device can be displayed (see For further information on the TV software,
please refer to the documentation (autostarter à documentation à TV software).
Note: When using the S-video input, be sure to read the section entitled "Attention! - Estab-
lishing the audio connection to the TV card." on page 23.
Cinergy TV Hardware (English)
S-video/S-video cable
21