Operation - Bunker Hill Security 69643 Owner's Manual

motion Detector Control Knobs (cont.)
luX (light level)
LUX
The LUX Adjusting Knob (9) tells the
sensor the level of darkness that must be
reached before the Light turns on.
note: If the Security Light is not operating at night due to interference from a street light or other
interference, turn the LUX knob towards the maximum setting (
between the minimum and maximum settings to achieve the desired level of sensitivity.
time (light Duration)
TIME
2 5
min sec
The TIME Adjusting Knob (11) sets how
long the Light stays lit after motion is
no longer detected by the sensor.
The TIME is adjustable from 5 seconds to 2 minutes.
Item 69643
Adjust Light Level
(When light will go ON).
Adjust Time
(How long light stays ON).
For technical questions, please call 1-800-444-3353.
minimum position
Turning the dial counterclockwise
to the minimum setting lowers the
sensor level. The sensor will only
trigger the light to turn on at dusk
or when it is dark out. This is the
ideal position for general evening
and night operation.
maximum position
Turning the dial clockwise to the
maximum setting increases the
sensor level. The light will go on
in most situations ranging from
dark to daylight.
). Adjust the dial as needed
minimum position
Turn the dial counterclockwise to
the minimum for the light to stay
on for 5 seconds after motion is
no longer detected.
mid Range
Adjusting the dial between the
Minimum and Maximum to
choose any time between 5
seconds and 2 minutes for the
light to stay on after motion is no
longer detected.
maximum position
Turn the dial clockwise to the
maximum for the light to stay on
for 2 minutes after motion is no
longer detected.
Page 7