Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2018 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
LED
Motion Security Light
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
18k
64910
Advertisement
Table of Contents
Related Manuals for Bunker Hill Security 64910
Summary of Contents for Bunker Hill Security 64910
- Page 1 Keep this manual and the receipt in a safe and dry place for future reference. Motion Security Light Visit our website at: http://www.harborfreight.com 64910 Email our technical support at: productsupport@harborfreight.com When unpacking, make sure that the product is intact and undamaged. If any parts are missing or broken, please call 1-888-866-5797 as soon as possible.
- Page 2 ESD (Electronic Discharge), shorten lamp life or alter performance. 4. Never connect an LED product directly to dimmer packs, occupancy sensors, timing devices, or other related control devices, unless individual product Page 2 For technical questions, please call 1-888-866-5797. Item 64910...
- Page 3 If unreadable or missing, contact 6. This product is not a toy. Do not allow Harbor Freight Tools for a replacement. children to play with or near this item. SAVE THESE INSTRUCTIONS. Item 64910 For technical questions, please call 1-888-866-5797. Page 3...
- Page 4 Motion Sensor on top. Bracket 2. Unscrew the Fixture Screw connecting the Light Fixture to the Base and remove the Base. Bracket Screws (new or existing) Figure C Page 4 For technical questions, please call 1-888-866-5797. Item 64910...
- Page 5 “GND” terminal on the Base. Figure F • Carefully tuck excess wire length back into the outlet box. 10. Caulk around the Base and mounting surface with silicone sealant (not included). Item 64910 For technical questions, please call 1-888-866-5797. Page 5...
- Page 6 “H” (high) position. To decrease the detection zone, slide the sensitivity switch toward the “L” (low) position. Page 6 For technical questions, please call 1-888-866-5797. Item 64910...
- Page 7 Note: Some parts are listed and shown for illustration purposes only, and are not available Note: If product has no serial number, individually as replacement parts. record month and year of purchase instead. Item 64910 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 64910 and is the answer not in the manual?
Questions and answers
What does it mean if one of the lamps lights up and the other is mostly dark but somewhat still flashing
If one lamp on the Bunker Hill Security 64910 is lit while the other is mostly dark but flashing, it may indicate a loose connection, a faulty LED, or an issue with the wiring. Check the connections to ensure they are secure and inspect the fixture for any visible damage. If the issue persists, replacing the faulty lamp or contacting technical support may be necessary.
This answer is automatically generated
BUNKER HILL SECURITY 2150 Lumen Dual Head Hardwired LED Security Light I've purchased several of these lights. I've had several of them where one light head dies out. Is there a fix to replace the light head that has died? Can i purchase a LED light to fix this Issue? Please advise Ty. Tom