Bunker Hill Security  69644 Owner's Manual & Safety Instructions

Bunker Hill Security 69644 Owner's Manual & Safety Instructions

36 led solar security light

Advertisement

Owner's Manual & Safety Instructions
Save This Manual
inspection, maintenance and cleaning procedures. Write the product's serial number in the back of the manual
near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and
the receipt in a safe and dry place for future reference.
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-800-444-3353 as soon as possible.
©
Copyright
2012 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly, operating,
visit our website at: http://www.harborfreight.com
email our technical support at: tech@harborfreight.com
®
. All rights reserved.
ITEM 69644
Read this material before using this product.
Failure to do so can result in serious injury.
Save thiS manual.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Bunker Hill Security 69644 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Bunker Hill Security Bunker Hill Security 69644

  • Page 1 No portion of this manual or any artwork contained herein may be reproduced in Failure to do so can result in serious injury. any shape or form without the express written consent of Harbor Freight Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing Save thiS manual.
  • Page 2: Table Of Contents

    table of Contents Safety ............2 Maintenance ..........6 Specifications ..........4 Parts List and Diagram ....... 7 Setup ............4 Warranty ............. 8 Operation ............ 5 WaRninG SYmBOlS anD DeFinitiOnS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.
  • Page 3 8. use eye protection. Wear ANSI-approved impact 12. have your product serviced by a qualified safety goggles when setting up this product. repair person using only identical replacement parts. This will ensure that 9. maintain products with care. Keep the the safety of the product is maintained.
  • Page 4: Specifications

    Specifications Lamp 36 LED lamps with reflective intensifier Battery Pack 3.2V, 600mAh, Li-ion Solar Panel 4" x 3" Amorphous Silicon Detects Motion Up to 20' Range of Motion Up to 120° Delay Time 30 Seconds Setup - Before use: Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
  • Page 5: Operation

    Functions Lamp Solar Panel Back of Lamp Wing Nut Mounting Hole Power Switch Outlet Figure B Base Operation Read the entiRe impORtant SaFetY inFORmatiOn section at the beginning of this manual including all text under subheadings therein before set up or use of this product. 1.
  • Page 6: Maintenance

    maintenance and Servicing procedures not specifically explained in this manual must be performed only by a qualified technician. tO pRevent SeRiOuS injuRY FROm tOOl FailuRe: Do not use damaged equipment. if abnormal noise or vibration occurs, have the problem corrected before further use. Cleaning, maintenance, and lubrication 1.
  • Page 7: Parts List And Diagram

    parts list and Diagram pleaSe ReaD the FOllOWinG CaReFullY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLy DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLy. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANy REPRESENTATION OR WARRANTy OF ANy KIND TO THE BUyER THAT HE OR SHE IS qUALIFIED TO MAKE ANy REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS qUALIFIED TO REPLACE ANy PARTS OF THE PRODUCT.
  • Page 8: Warranty

    90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.

This manual is also suitable for:

69644

Table of Contents