Seek Tuning; Manual Tuning; Direct Tuning - Jensen VM9216BT Operating Instructions Manual

VM9216BT
Switching to Radio Tuner Source
• Touch the top left corner of the screen (the radio box) to view the SOURCE
MENU. Touch "Radio".
• Press the SRC button on the front panel to switch to the AM/FM or RADIO
source.
Selecting FM/AM Band
Touch the Band icon on the screen to change between the following bands: FM1,
FM2, FM3, AM1, and AM2.
NOTE: The BAND button on the front panel of the unit only works when the TFT is
closed.

Seek Tuning

To seek the next higher station, touch the
To seek the next lower station, touch the

Manual Tuning

To increase or decrease the tuning frequency one step, touch the

Direct Tuning

To enter a radio station directly:
Direct Entry icon
1. Touch the
2. Enter the desired radio station frequency using the on-screen number pad.
If you wish to delete an entry number touch the
to the selected station and touch the OK button. To exit the screen without
changing the station, touch X.
button.
button.
to display the DIRECT ENTRY MENU.
or button.
icon. Press OK to tune
37