Connecting The Video Out To Your Tv; Hdmi Function - Samsung MAX-DA79 User Manual

Connecting the Video Out to your TV

Choose one of the three methods for connecting to a TV.
METHOD 1
METHOD 1 : HDMI ....... (Best Quality)
Connect the HDMI cable from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack on your TV.
METHOD 2 : Component Video ....... (Better Quality)
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) jacks on the back of the panel of the main unit to the corresponding
jacks on your television.
METHOD 3 : Composite Video....... (Good Quality)
Connect the supplied video cable from the VIDEO OUT jack on the back of the main unit to the VIDEO IN jack on
your TV.
Note
• This product operates in Interlace scan mode for Component Output.
13
METHOD 2
METHOD 3

HDMI Function

Resolution Selection
This function allows the user to select the screen resolution for HDMI output.
In Stop mode, press and hold the SD/HD (Standard Definition/High Definition)
button on the remote control.
Resolutions available for the HDMI output are 576p/480p, 720p, 1080i.
SD(Standard Definition) resolution is 576p/480p and HD(High Definition) resolution is 720p/1080i.
• If the TV does not support the configured resolution, you will not be able to see the
Note
picture properly.
• When an HDMI cable is connected, composite and component video signals
Why use HDMI (High Definition
are not output.
Multimedia Interface)?
• See your TV owner's manual for more information on how to select the TV's Video
This device transmits a DVD
video signal digitally without Input source.
the process of converting to
analog. You will get sharper
digital pictures when using an
HDMI connection.
Setting the HDMI Audio
The audio signals transmitted over the HDMI Cable can be toggled ON/OFF.
1
In Stop mode, press the MENU button.
2
Press the Cursor
3
Press the Cursor
the ENTER button.
MOVE ENTER RETURN EXIT
4
Press the Cursor
the ENTER button.
• ON : Both video and audio signals are transmitted over the HDMI connection cable, and audio
is output through your TV speakers only.
• OFF : Video is transmitted over the HDMI connection cable only, and audio is output through
MOVE SELECT RETURN EXIT
the home theater speakers only.
• The default setting of this function is HDMI AUDIO OFF.
Note
• HDMI AUDIO is automatically down-mixed to 2ch for TV speakers.
• P.BASS/CD RIPPING/MIC VOLUME UP/DOWN/ECHO/P.SOUND/EQ/DSP function is not
available when HDMI AUDIO is ON.
Press the RETURN button to return to the previous level.
Press the EXIT button to exit the setup screen.
button to move to <Audio> and then press the ENTER button.
button to move to <HDMI AUDIO> and then press
, button to select <ON> or <OFF> and then press
ENG
14