Connecting The Speakers; Connecting The Video Out To Your Tv - Samsung MM-C430D User Manual

Connecting the Speakers

Before moving or installing the product, be sure to turn off the power and
disconnect the power cord.
L
Position of the DVD Player
• Place it on a stand or cabinet shelf, or under the TV stand.
Front Speakers L
R
• Place these speakers in front of your listening position, facing
inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at the same
height as your ear.
MM-C430D/
C530D
L
SPEAKERS
OUT (6 )
R
• Do not let children play with or near the speakers. They could get hurt if a speaker falls.
• Keep the speaker out of reach of children so as to prevent children from inserting their hands or alien substances
into the duct (hole) of the subwoofer speaker.
• Do not hang the subwoofer on the wall through the duct (hole).
• If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by
the speaker. If this occurs, place the speaker away from your TV set.
11
Downloaded From Disc-Player.com Samsung Manuals
SW
R
Selecting the Listening Position
The listening position should be located about 2.5 to 3 times the
distance of the TV's screen size away from the TV.
Example : For 32" TVs 2~2.4m (6~8feet)
For 55" TVs 3.5~4m (11~13feet)
Subwoofer
SW
• The position of the subwoofer is not so critical.
Place it anywhere you like.
MM-C550D
L
SPEAKERS OUT
FRONT (6 ) SUB WOOFER(4 )
L
L
R R
R

Connecting the Video Out to your TV

Please be sure to turn off the power and unplug the power cord before moving or
installing this unit.
Please choose one video connection method.
METHOD 1 : HDMI ....... (Best Quality)
Connect the HDMI cable (not supplied) from the HDMI OUT jack on the back of the DVD Player to the HDMI IN jack
on your TV.
METHOD 2 : Component Video ....... (Better Quality)
SW
If your television is equipped with Component Video inputs, connect a Component video cable(not supplied) from
the Component Video Output (Pr, Pb and Y) jacks on the back of the DVD Player to the Component Video Input
jacks on your TV.
METHOD 3 : Composite Video ....... (Good Quality)
Connect the supplied Video cable from the VIDEO OUT jack on the back of the DVD Player to the VIDEO IN jack on your TV.
Resolutions available for the HDMI output are 480p/576p, 720p,1080i/1080p. See page 15 for resolution setting.
•
This product operates in Interlace scan mode (480i/576i) for Component Output.
•
After making the video connection, set the Video input source on your TV to match the corresponding Video output
•
(HDMI, Component or Composite) on your Micro Component.
See your TV owner's manual for more information on how to select the TV's Video Input source.
If you use an HDMI cable to connect a Samsung TV to the main unit, you can operate the
•
using the TV's remote control. (This is only available with SAMSUNG TV's that support Anynet+(HDMI-CEC).)
Please check the
•
iPod
METHOD 2
METHOD 3
METHOD 1
(supplied)
logo (If your TV has the logo, then it supports the Anynet+ function.).
ENG
Micro Component
12