Installing Your Microwave Oven; Selecting The Display Language; Setting The Time - Samsung CK135 Owner's Instructions And Cooking Manual

Installing Your Microwave Oven

This microwave oven can be placed almost anywhere (kitchen work
surface or shelf, movable trolley, table).
For your personal safety, this appliance must be:
Properly earthed (3-pin plug)
Plugged into a standard 230 Volt, 50 Hz, AC
earthed socket
1
Install the oven on a flat, level, stable surface. Make sure there is
adequate ventilation for your oven with at least 10cm(four inches) of space
behind, and on the sides of the oven and 20cm(eight inches) of above and
that the oven is at least 85cm(thirty three inches) off the floor.
2
Never block the air vents as the oven may overheat and automatically
switch itself off. It will remain inoperable until it has cooled sufficiently.
3
Remove all packing materials inside the oven. Install the roller ring and
turn-table. Check that the turn-table rotates freely.
4
Plug the cable into a 3-pin, earthed socket. If the power cable of this
appliance is damaged, it must be replaced by a special cable (references I-
SHENG SP022, KDK KKP 4819 D, SAMIL SP-106B, MOONSUNG EP-
48E or EUROELECTRIC 3410). Contact your local dealer to have it
replaced. The power cable of S/AFRICA, U.A.E is EUROELECTRIC
(3183Y), ISRAEL is PENCON (ZD16A) and NIGERIA, GHANA and
KENYA is PENCON UD 13A1).

Selecting the Display Language

The first time you plug the power cord into an outlet, or after there has
been an interruption in power, the display shows "SELECT YOUR
LANGUAGE". At this point, you can select a language for the display.
You can choose from English, French, German, Spanish, Italian, Dutch
and Russian.
1
Press the Language button immediately after plugging in your microwave,
or immediately after a power outage.
Result: If you continue to press the Language button, the settings will
cycle in the following order:
ENGLISH(LBS), ENGLISH(KG), FRENCH, GERMAN,
SPANISH, ITALIAN, DUTCH, RUSSIAN.
2
When you have selected the language and display you want to use, press
the Start ( 1min+) button to end this procedure.

Setting the Time

Your microwave oven has an inbuilt clock. The time can be displayed
in either the 24-hour or 12-hour notation. You must set the clock:
When you first install your microwave oven
After a power failure
Do not forget to reset the clock when you switch to and
from summer or winter time.
1
To display the time in the...
12-hour notation
24-hour notation
2
Turn the dial knob to set the hour.
3
Press the clock( ) button.
4
Turn the dial knob to set the minute.
5
When the right time is displayed, press the Clock(
Result: The time is displayed whenever you are not using the microwave
oven.
Then press the Clock ( ) button...
Once
Twice
) button to start the clock.
Recommendations
DO NOT install the microwave oven in
hot or damp surroundings.
Example: Next to a traditional oven or
radiator.
The power supply specifications of the
oven must be respected and any
extension cable used must be of the
same standard as the power cable
supplied with the oven.
Wipe the interior and the door seal with a
damp cloth before using your microwave
oven for the first time.
Caution
This microwave oven has to be
connected to the plug endurable to
proper power consumption.
9
GB