Listening To A Cassette; Cd Synchro Record Feature; Recording A Radio Program; Copying A Cassette (Dubbing) - Samsung MAX-VT55 Instruction Manual

Listening to a Cassette

GB
Always treat your cassettes with care; refer, if necessary, to
the section entitled "Precautions When Using Audio Cassettes"
on page 26.
1
Switch the system on by pressing the STANDBY/ON button.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open either cassette deck 1 or 2 by pushing and releasing the deck
cover where PUSH EJECT ( ) is written.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downward.
5
Close the deck by pushing on it until it clicks into place.
Result: Depending on the deck selected, the 1 or 2 indication is
displayed in front of the counter number.
6
If you have inserted two cassettes, press TAPE 1/2 on the front panel
or directly the TAPE 1/2 button on the remote control to select the
cassette to be played.
Result: Depending on the deck selected, the TAPE 1 or TAPE 2
indication is displayed.
7
To listen to... Press ...
Side A,B TAPE ( )
Result: The cassette starts playing.
When the cassette is stopped, select one of the following functions
as required or on the remote control.
8
Main Unit
To... Press...
Rewind the cassette
Fast-forward the cassette
Remote Control
To... Press ...
Rewind the cassette
Fast-forward the cassette
9
To... Press ...
Stop the playback
1
8
8
9 8
6
20

CD Synchro Record Feature

You can record a compact disc on a cassette in two different ways:
Synchr onised recording
Direct recording
This feature enables you to synchronize the start of the
recording with the start of the disc or track of your choice.
1
Switch the system on by pressing STANDBY/ON.
2
Insert a blank cassette in TAPE 2.
3 Select the CD function by pressing VCD/CD on the front panel.
4
Load a compact disc or VCD.
Select the required disc.
5
Select the required track and press CD SYNCHRO or press CD
6
SYNCHRO directly to start recording at the beginning of the disc.
Result: REC and SYNC are displayed and recording starts.
7
To stop recording, press .
Synchronized recording Function is available for VCD/CD only.
1
3
7
Recording a Compact Disc
The direct recording mode enables you to start recording with
any track on the compact disc.
You can only record on cassettes inTape 2.
You do not need to adjust the volume, as it has no effect on the recording.
Switch your system on by pressing STANDBY/ON.
1
Insert a blank cassette in Tape 2.
2
Select the CD function by pressing VCD/CD on the front panel.
3
Load the compact disc.
4
Select the required disc.
5
Select the required track on the compact disc and press on the front
6
panel or on the remote control to set the compact disc player to Pause
mode.
Press the REC/PAUSE.
7
Result: REC is displayed.
Press the to start playing the track.
8
Result: The track is recorded on the cassette.
9 To stop recording, press .
1
3,6,8
7
9

Recording a Radio Program

You can record a radio program of your choice.
You can only record on cassettes in Tape 2.
You do not need to adjust the volume, as it has no effect on
the recording.
1
Switch the system on by pressing STANDBY/ON.
2
Insert a blank cassette in Tape2.
3
Select the TUNER function by pressing TUNER.
4
Select the radio station that you wish to record by pressing Tuning
or on the remote control or by press the Tuning Down or
Up on the front panel.
5
Press REC/PAUSE.
Result: REC is displayed in red and recording starts.
6
To stop recording, press .
1
3
6
6 4
4

Copying a Cassette (Dubbing)

You can copy a cassette from Tape1 to Tape 2.
Normal speed dubbing in selecting Tape function mode.
You do not need to adjust the volume, as it has no effect on the
recording.
Take care not to insert the tape to be copied in Tape2, as it will
be erased when you start recording.
1
Switch your system on by pressing STANDBY/ON.
2
Insert a blank cassette in Tape2.
3
Insert the tape to be copied in Tape1.
4
To copy a cassette at...
Normal speed
Result: The appropriate indications are displayed and the cassette in
Tape1 is copied to the cassette in Tape2.
5
To stop dubbing, press .
1
5

Tape Counter

When playing a cassette in one of the cassette decks, a
counter is displayed to enable you to take note of the counter
value at the start of each track to start playback at the
beginning of the track to which you wish to listen.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET .
Each cassette deck has a separate counter.
5
Press...
DUBBING
4
GB
21