Searching For And Storing The Radio Stations; Selecting A Stored Station; Improving Radio Reception - Samsung MAX-VT55 Instruction Manual

Searching for and Storing the
Radio Stations
GB
You can store up to:
15 FM stations
15 AM stations
1 Switch the system on by pressing STANDBY/ON.
2
Select the TUNER function by pressing TUNER.
3
Select the required frequency band by pressing TUNER /BAND
again on the front panel or TUNER /BAND on the remote control.
Result: The appropriate indication is displayed:
FM Frequency Modulation
AM(MW) Medium Wave
4
To search for a Press TUNING MODE
station...
Manually Once or more times until MANUAL
is displayed.
Automatically Once or more times until AUTO is
displayed.
5
Select the station to be stored by:
Turning the MULTI JOG knob to the right or to the left to increase
or decrease the frequency respectively
or
Pressing or on the remote control
To scroll through the frequencies faster when searching
manually, hold down the or buttons.
The automatic search procedure may stop on a frequency that
does not correspond to a radio station. If this happens, use the
manual search mode.
6
Adjust the volume by:
Turning the VOLUME knob on the front panel
or
Pressing the VOLUME + or – buttons on the remote control
7
Select the FM stereo or mono mode by pressing MONO/ST.
8
If you do not want to store the radio station found, revert to Step 4
and search for another station.
Otherwise:
a Press TUNER/MEMORY.
Result: The PRGM is displayed for a few seconds.
b Press or to assign a program number .
c Press TUNER/MEMORY to store the radio station.
Result: PRGM is no longer flashed and the station is stored.
9
To store any other radio frequencies required, repeat Steps 3 to 8.
The PROGRAM function can be used to assign a new station
to an existing program number.
In Tuner mode
In manual tuning mode, you can use MULTI JOG or
button on the panel front to manual search a radio station.
During Tuner auto searching, press button to stop auto
searching.
In Preset tuning mode, you can use MULTI JOG or
button on the panel front to search a stored radio station.
18
1
2,3
5,8
5,8
4
6
DISC SKIP BAND
CD TUNER TUNER TAPE AUX
3
POWER
OPEN/CLOSE CD REPEAT
1
1 2 3
4 5 6
7 8 9
TUNING MODE TAPE 1/2
SOUND +10/0 SLOW
+10/0
4
TIME SEARCH SOUND MODE DISC VIEV RETURN
VCD/ CD /TAPE
6
5,8
MUTE
VOLUME TUNING
5,8
6
/
KEY CONTROL MONO/ST
b
# ZOOM
ZOOM
/

Selecting a Stored Station

You can listen to a stored radio station as follows:
1
Switch the system on by pressing STANDBY/ON.
2
Select the TUNER function by pressing TUNER (BAND) on remote control.
3
Select the required frequency band by pressing TUNER (BAND) on
the remote control or TUNER (BAND) again on the front panel.
4
Press the TUNING MODE button on the front panel of the unit, or the
TUNING MODE button on the remote control until "PRESET" is
displayed.
5
Turning MULTI JOG on the front panel left or right until the desired
station is found or press
or
Select the desired station by pressing the station number stored,
using the TUNING
Result: The desired station is now received.
7
8
1
2,3
5
5 4 3
TIME SEARCH SOUND MODE DISC VIEV

Improving Radio Reception

You can improve the quality of radio reception by:
Rotating the FM or AM(MW) aerial
Testing the positions of the FM and AM(MW) aerials before fixing them
permanently
If reception from a specific FM radio station is poor, press MONO/ST.
to switch from stereo mode to mono. The quality of the sound will be
improved.
/ to select the desired station.
or button on the remote control.
POWER
OPEN/CLOSE
CD REPEAT
1
1 2 3
4 5 6
7 8 9
TUNING MODE TAPE 1/2
SLOW
SOUND +10/0
+10/0
4
RETURN
VCD/ CD /TAPE
5
MUTE
VOLUME TUNING
5
KEY CONTROL MONO/ST
b # ZOOM
GB
19