Setting The Clock; Listening To A Compact Disc - Samsung MM-N4 Instruction Manual

Setting the Clock

Your system is equipped with a clock which allows you to turn
your system on and off automatically. You should set the clock:
GB
When you purchase the Micro component system
After a power failure
After unplugging the unit
For each step, you have a few seconds to set the required
options. If you exceed this time, you must start again.
1
Switch the system on by pressing On/Standby.
2
Press Timer/Clock twice.
Result: CLOCK is displayed.
3
Press Program/Set.
Result: The hour flashes.
4
To...
Increase the hours
Decrease the hours
5
When the correct hour is displayed, press Program/Set.
Result: The minutes flash.
6
To...
Increase the minutes
Decrease the minutes
7
When the correct time is displayed, press Program/Set.
Result: The clock starts and is displayed, even when the
system is in standby mode.
You can display the time, even when you are using another
function, by pressing Clock once.
On/standby
1
EQ Preset
Sleep
4 6
6
Press...
Press...
Timer Timer/
On/Off Clock
2
Power Program
/Set
Sound AUX
3 5 7
CD Repeat Mono/ST TUNER
VOL.
Tuning
Mode 4 6
CD
CD
CD CD
VOL.

Listening to a Compact Disc

You can play 12 cm or 8 cm compact discs without an adapter.
1
Select the CD function by pressing CD on the front panel.
2
Open the compact disc compartment by pressing down and
releasing the cover.
3
Place your disc in the compartment, with the label on the disc
facing upwards.
4
Close the compartment by pushing down on the cover until it
clicks into place.
Result: The display indicates the number of tracks on the
disc.
5
Press the Play/Pause (
Result: The first track on the disc plays and the track
number is displayed.
6
To stop playback temporarily, press the Play/Pause (
button.
Press Play/Pause (
disc.
7
To start playing
at the beginning of...
The next track
The current track
The previous track
The track of your choice
8
To search through
the tracks...
Forwards
Backwards
You are advised to turn the volume down before using
this function.
9
Press the STOP ( ) button when you have finished.
1
Band
TUNER TAPE
On/Standby
9
9
7 8
CD
CD
) button.
)
) again to continue playing the
Press...
SKIP/SEARCH once
SKIP/SEARCH once
SKIP/SEARCH twice
SKIP/SEARCH or
the appropriate number of times
Press and hold down...
SKIP/SEARCH until you
reach the required point
SKIP/SEARCH until you
reach the required point
2 4
CD AUX
CD
REC/Pause
VOLUME
CD
5 6
VOL.
Tuning
Mode
7 8
CD
CD