Power Sound Function; Connecting Headphones; Connecting To An External Source - Samsung MM-N4 Instruction Manual

Power sound function

This machine is equipped with the function of Power Sound, which
amplifies bass and improves high key or bass twice as much for you
GB
to appreciate powerful real surround-sound.
1
Press the Power Sound button on the front panel.
Result: P--SOUND is displayed for a few seconds.
A more powerful resonant sound is diffused.
2
To cancel this function, press Power Sound again.
Mute
Phones
RDS
COUNTER
RESET PTY REPEAT

Connecting Headphones

You can connect a set of headphones to your micro component
system so that you can listen to music or radio programmes without
disturbing other people in the room. The headphones must have a
3.5 mm jack or appropriate adapter.
Connect the headphones to the Phones connector on the front panel (bottom
left corner).
Result: The loudspeakers are no longer used for sound output .
Prolonged use of headphones at a high volume may
damage your hearing.
14
REC/Pause
VOLUME
Repeat(A<->B)
CD Synchro
CD
Display
Power Sound Power Sound
Band
TUNER TAPE CD AUX
On/Standby
REC/Pause
VOLUME
Repeat(A<->B)
Mute
Phones
RDS
COUNTER CD CD Synchro
RESET PTY REPEAT Display
Power Sound

Connecting to an External Source

The auxiliary input can be used to take advantage of the sound
quality of your micro audio system when listening to other
sources.
Example: A television
A video disc player
A DAT or DCC cassette player
A Hi-Fi stereo video cassette recorder
To connect to an external source, the external source must
have an audio output terminal. In addition, you need an RCA
connection cable.
1
Before connecting to an external source, set the system to standby
mode and disconnect it and the external source from the mains.
2
Connect the audio cable to the rear of the system.
Connect the...
Red jack
White jack
For optimum sound quality, do not invert the right and left
channels.
3
Plug the system back into the mains socket and press
On/Standby to switch it on.
4
Press AUX.
Result:AUX is displayed.
5
Switch the external source on.
6
Adjust the volume and balance as required:
Volume
Equalizer
S. BASS
Example: You can watch a film and take advantage of stereo
sound as if you were at the cinema (provided that the
original sound track is in stereo).
Band
TUNER TAPE
On/Standby
3
Mute
Phones
CD
COUNTER Counter CD
Repeat
RESET Reset REPEAT
To the connector marked...
R (right)
L (left)
CD AUX AUX
4
REC/Pause
VOLUME
Repeat(A<->B)
CD Synchro