Table of Contents
Advertisement
Listening to a Cassette
1
GB
Switch the system on by pressing On/Standby.
2
Select the TAPE function by pressing TAPE on the front panel.
3
Open the cassette deck by pushing on the corner of the cover
marked PUSH EJECT until you hear a click and then releasing it.
4
Insert the pre-recorded cassette with the open edge of the tape
facing downwards.
5
Close the deck by pushing on it until it clicks into place.
6
To listen to...
Side A,B
Result:
The cassette starts playing.
7
To...
Adjust the volume
Stop the playback or search
8
When the cassette is stopped, select one of the following
functions as required.
To...
Rewind the cassette
Fast-forward the cassette
The cassette player stops automatically when the
beginning or end of the cassette is reached.
1
Phones
Sleep
CD Repeat Mono/ST
TUNER
8
TAPE
7
8
CD
10
Press...
Press...
Volume + or – (or the
Volume
and
buttons on the front panel)
STOP (
)
Press...
2
6
Band
TUNER
TAPE
TAPE
CD
AUX
7
On/Standby
REC/Pause
VOLUME
8
8
Repeat(A<->B)
Mute
7
RDS
COUNTER
CD
CD Synchro
RESET
PTY
REPEAT
Display
Power Sound
3 5
VOL.
VOL.
Band
7
Tuning
Mode
CD
7
VOL.
VOL.
Tape Counter
When playing a cassette, a counter is displayed to enable you to take
note of the counter value at the start of each track and thus start
playback at the beginning of the track to which you wish to listen.
The counter is only displayed when a cassette is being played.
Before starting to record a cassette for which you wish to take note of the
counter values at the beginning of each track, reset the counter by
pressing COUNTER RESETon the front panel.
To obtain the best possible results from your cassette player, you
must clean it regularly (heads, roller and drive capstan).
Phones
Maintaining the Sound Quality
Open the deck by pressing the PUSH EJECT button. Use a cotton bud
and a special cassette cleaning agent to clean the:
Heads (
Roller (
Drive capstan (
To guarantee hours of enjoyable listening with your cassettes:
Check that the tape in the cassette is always sufficiently taut
Store your cassettes in a clean place, out of direct sunlight, where
they will not be exposed to high temperatures
Avoid using 120-minute cassettes as they are extremely fragile
3
2
CD Digital Out Jack (Option)
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect digital audio equipment.
CD
(DAT deck, MD recorder, etc.).
Remove the dust cap (1) from the CD DIGITAL OUT jack. Then,
connect an optical cable plug to the CD DIGITAL OUT jack.
When the CD DIGITAL OUT jack is not being used.
Attach the supplied dust cap.
Repeat(A<->B)
Mute
RDS
CD Synchro
COUNTER
CD
COUNTER
CD
Display
RESET
PTY
REPEAT
RESET
REPEAT
Power Sound
)
)
)
3
1
2
(1)
Advertisement
Table of Contents
