Selecting The Sound Mode (Depending On The Model) - Samsung COLOUR TELEVISION Owner's Instructions Manual

Selecting the Sound Mode
The "S.MODE" button displays/controls the processing and output
of the audio signal. When power is switched on, the mode is
automatically preset to either "Dual-I " or "Stereo", depending on
the current transmission.
Type of broadcast
Regular broadcast
(Standard audio)
Regular +
NICAM Mono
NICAM
Stereo
NICAM Stereo
NICAM Dual-I/II
Regular broadcast
(Standard audio)
A2
Bilingual or Dual-I/II
Stereo
Stereo
➣
N If the receiving conditions deteriorate, listening will be
easier if the mode is set to the MONO.
N If the stereo signal is weak and an automatic switching
occurs, then switch to the MONO.
N When receiving a mono sound in the AV mode, connect
to the "AUDIO-L" input connector on the panel (front or
side, depending on the model). If the mono sound comes
out only from left speaker, press the S.MODE button.
(depending on the model)
On-screen indication
MONO (Normal use)
NICAM MONO ↔ MONO
NICAM STEREO ↔ MONO
(Forced mono)
NICAM Dual-I ¡
NICAM Dual-II ¡
MONO
MONO
DUAL-I ↔ DUAL-II
STEREO ↔ MONO
(Forced mono)
ENG
29