Axis P5512 User Manual page 27

Ptz dome network camera

Hide thumbs Also See for P5512:

Table of Contents

AXIS P5512 PTZ Dome Network Camera

Live View Config

2. Under Output Buttons, select the type of control to use:

Pulse activates the output for a defined period of time. The pulse time can be set from 1/100 second to 60

seconds.

Active/Inactive displays two buttons, one or each action.

To configure the active and inactive states, go to System Options > Ports & Devices > I/O Ports and set the port's Normal state.

For more information about I/O ports, see I/O Ports, on page 49.

Note

A multi-connector cable (available from Axis) is required when connecting external I/O devices to the Axis product. See

Multi-Connector Cable (sold separately), on page 53

Table of Contents