Assembly Instruction - Impex ZON Owner's Manual

ASSEMBLY INSTRUCTION

Tools Required Assembling the Machine:
Philips Head Screwdriver and Allen Wrench.
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.
STEP 1 (See Diagram1)
A.) Slide the Seat Support (#3) onto the Chromed Sliding Track (#2).
B.) Place the Sliding Track (#2) onto the Main Frame (#1). Secure it with six M8 x 5/8"
Allen Bolts (#17) and Ø 5/8" Washers (#18).
C.) Close the front of the Sliding Track with the Front Cap (#4)
Diagram 1
4