Assembly Instructions - Impex MARCY PL-21930 Owner's Manual

ASSEMBLY INSTRUCTION
Tools Required Assembling the Machine: Two Adjustable Wrenches and Allen
Wrenches.
NOTE: It is strongly recommended two or more people assembling this machine to
avoid possible injury.
STEP 1 (See Diagram1)
A.) Attach the Rear Stabilizer (#2) to the Main Frame (#1). Secure it with two M10 x 3 1/8"
Carriage Bolts (#3),
B.) Plug the Rear Stabilizer End Caps (#31) onto both ends of Rear Stabilizer (#2). Set
the equipment on a flat surface. If the floor is uneven, rotate the Caps to level the
machine.
1" Bent Washers (#5), and M10 Acorn Nuts (#4).
4
Diagram 1