Table of Contents
Advertisement
Reset hole
DVP1080 oPeratIon
FRONT PANEL CONTROLS
Each time the processor is powered up, it will
go through an initialising power-up sequence.
RESET: In the event of a processor firmware
lockup, insert a small paper clip into opening
to reset. Stored profiles and system settings
will not be erased.
• Unplugging the unit from power source will
accomplish the same task.
POWER: Press to turn ON unit (LED Green),
press again to put unit in STANDBY (LED Red)
• All settings are stored in nonvolatile memory so
a power loss will not result in loss of settings.
IR WINDOW: Location of IR sensor for remote
control and IR remote systems
VACUUM FLUORESCENT DISPLAY (VFD):
Provides information on the status of the
processor. The readout will match what is
being controlled via the OSD. It also provides
readout of the SETUP menu functions and unit
warnings.
• The SETUP menu is only visible via the front-
panel VFD
ON-SCREEN DISPLAY (OSD)
There are four OSD menu pages: INPUT,
PICTURE, DISPLAY, PATTERNS.
I
NPUT: INPUT, ASPECT RATIO, PROFILES
PICTURE: BRIGHTNESS, CONTRAST, COLOR, TINT,
DETAIL, ADVANCED COLOR CONTROL
DISPLAY: IMAGE POSITION, IMAGE BLANKING
PATTERNS: TEST PATTERN ON/OFF, SELECT
The remote control is used to access these
menus.
Power LED
IR Window
Power button
Vacuum Fluorescent Display (VFD)
INFRARED REMOTE CONTROL
The DVP1080HD offers simple control of
picture adjustments via an on-screen menu,
controlled by the multi-function remote
control supplied.
Select processor
REMOTE BUTTON OPERATION
DEVICE SELECT BUTTONS
Press the [DVP] button to select the processor
before attempting to control it. If you have a
Meridian projector you can press the [DILA]
button before addressing it.
1
Select projector
On
DVP
DILA
Off
Profile
Store
Preset
Enter
Bypass
Menu
Exit
YCrCb
DVI
Video
S-Video
RGB
Anamorphic
4:3
Letterbox
Colour
Tint
Detail
1
2
3
Pattern
Focus
4
5
6
Printed in White
7
8
9
T
Hide
Zoom
Test
W
0
Bright.
Cont.
Light
Backlit panel
Backlit
Advertisement
Table of Contents
