Related Manuals for Faroudja NRS-DVI
Summary of Contents for Faroudja NRS-DVI
- Page 1 Native Rate Series NRS-DVI Digital Video Processor Installation and Operations Manual NTSC Model ™...
-
Page 2: Quick Start
Read the complete Owner’s Manual for the NRS-DVI blanking first using the controls found in the display before installation. device. Only use these controls in the NRS-DVI if the display device does not offer these controls or if there Review the owner’s manual of the display. Most is not enough range. -
Page 3: Table Of Contents
No part of this document may be copied, photocopied, translated, or reproduced to any electronic medium or machine readable form without prior consent, in writing, from Faroudja Laboratories, Inc. The Faroudja name, logo and Picture Plus are registered trademarks of Faroudja, Inc. Specifications subject to change without notice. All Rights Reserved. -
Page 4: Installation
DVDs, Satellite systems, S-VHS tape decks be moved or returned for service. Shipping unit back (when using S-VHS tapes only), Hi-8 tape to Faroudja for service not in the original box may decks. result in voiding warranty. 2. Composite video input (BNC) for sources such... -
Page 5: Connecting Hdtv Satellite Receivers
HDCP Encription cable length is 50ft. For longer lengths a distribution system or fiber optic system must Note: The NRS-DVI pass-through input will “pass ” be used. the input signal to the output stage in the same format as the input signal, i.e. analog HDTV in –... -
Page 6: Front Panel Control
Changes sync polarity, which may be needed for Note: All display devices have specific setup steps compatibility with some displays. that must be completed to insure proper operation with the NRS-DVI and other Vertical Sync Polarity sources. Be sure to carefully follow those Negative (Default) / Positive... - Page 7 If this is not set properly, the device that conforms to SMTPE Betacam levels aspect ratio selection for the different sources Note: Each input on the NRS-DVI can be activated or located in the user menu will be incorrect. deactivated to simplify operation so unused inputs •...
-
Page 8: Processor Ir Remote And On-Screen-Display Operation
ON SCREEN DISPLAY (OSD) OSD OPERATION Accessing the OSD The NRS-DVI is shipped with an eight button remote • Press Menu button to bring up main Index. for controlling all Functions available in the unit. • Use Function Keys until the triangle at the The remote control allows for easy operation by top of the OSD turns yellow. -
Page 9: Operating The Processor
Note: The Pass-Thru input cannot be selected from cause permanent image burn-in. Image burn-in is not covered by Faroudja’s warranty the OSD since an OSD is not available on that input. Use the Input button on the remote to select it. - Page 10 (Bypass). For most sources, the Normal sources such as the NRS-DVI or HDTV. Be sure to setting should be selected. These settings can be completely read the installation manual for the stored as a User Preset.
-
Page 11: Test Pattern List
DVD is not available, then use the internal test 100IRE Rev. CB: Color bars for decoder check patterns provided in the NRS-DVI. Note: The test pattern generator in the NRS-DVI is set to SMPTE standards. To insure proper output RS232 INSTRUCTIONS... - Page 12 RS232 CODES Following the header, a comma is used to delimit the are terminated with a carriage return (0x13). header from the command. All the commands with Maximum command string length is 250 characters. their descriptions are listed below. All the text strings The header and command are not case sensitive OPERATION COMMANDS (Used for day-to-day operation)
- Page 13 HLE Gain HLET HLE Threshold VDPG VDP Gain VDPT VDP Threshold Note: The default settings for the Enhancer can be different for each scan rate. Enter NRS-DVI, FST in a terminal driver program to get the default numbers or contact Faroudja.
-
Page 14: Infrared Command List
INFRARED COMMAND LIST Direct access Infrared commands are available. Contact Faroudja technical support for details. IR Command List Power On/Off (toggle) (aspect ratio) Letterbox (aspect ratio) Input Anamorphic (aspect ratio) Aspect Ratio Power On Brightness Power Off Contrast Preset 1... -
Page 15: Specifications
SPECIFICATIONS Inputs (Interlaced) Format NTSC Only Composite(BNC) 1vpp S-Video (4-pin DIN) 1vpp C -286mvpp Component (BNC) Auto-detect: Y -1vpp(SMPTE) 480i/480p sent to upconverter, Cr -700mvpp 1080i or 720p sent to pass-through. Cb -700mvpp RGB ( BNC) Interlaced Comp. Sync -1vpp RGB -700mvpp HD/PC Pass-Thru D15M... -
Page 16: Warantee
Faroudja’s option, replace defective products or portions thereof. Warranty may be void if unit is returned to Faroudja Service not shipped in the original shipping carton. THE FOREGOING WARRANTY IS IN LIEU OF ALL WARRANTIES EXPRESSED,...
Need help?
Do you have a question about the NRS-DVI and is the answer not in the manual?
Questions and answers