Advertisement
CARE AND MAINTENANCE
1. Lubricate moving parts with WD-40 or light oil periodically.
2. Inspect and tighten all parts before using the equipment.
3. The equipment can be cleaned using a damp cloth and mild non-abrasive detergent.
DO NOT use solvents.
4. Examine the equipment regularly for signs of damages or wear.
5. Replace any defective components immediately and/or keep the equipment out of use until
repair.
6. Failure to examine regularly may affect the safety level of the equipment.
WEIGHT CAPACITY AND DIMENSION
1. Maximum weight on bench: 600 lbs.
2. Assembled Dimension: 68" x 24" x 44"
OPERATION NOTES
1. Move Seat Linkage Bar forward for flat, decline and some incline positions. The rear Seat
Linkage bar position is for higher incline or shoulder press position.
2. When using the Leg Developer, move back Seat Linkage Bar to have front stability without
tipping then loading weight plates to Leg Developer.
3. To lock the Leg Developer while not in use, simply pull the U-shaped Pin out and drop into
the hole on the Leg Developer to lock the Leg developer while not in use. Remove the Pin
when doing Leg Developer exercises.
4. When the Bench is not being used it, it is stored in the rear position to save space.
BACKREST ADJUSTMENT ANGLES
©IMPEX INC.
7
www.impex-fitness.com
Advertisement
