White Balance - Genie ID73 User Manual

* RETURN:
Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu.
NOTE
* Pressing the SET button in AUTO mode allows adjustment of image brightness
by increasing or decreasing the shutter speed (x2 ~x1024).
* The higher the level, the brighter the image becomes, but it is possible that an
after image (ghosting) could appear.
* When SENS-UP is activated the increased magnification can induce noise and
pixelation; this is quite normal.

White Balance

The White Balance function is used to control the "on-screen" colours.
1. Move the arrow indicator to WHITE BAL on the SETUP menu screen using the Up and Down buttons.
2. Select the desired mode using the Left or Right buttons.
* There are three user selectable White Balance settings available.
* ATW: (Auto Tracking White Balance)
Normal setting; when the colour temperature range is from 1,800˚K to 10,500˚K (e.g. a fluorescent lamp or outdoors).
* AWC → SET: To obtain the best results press the SET button while the camera is focused onto white
paper. If the environment, and/or light source changes, the White Balance will require re-adjustment.
ADVANCED SETUP
LENS
EXPOSURE
WHITE BAL
D-WDR/HSBLC
HD-DNR
DAY/NIGHT
SMART-IR
SPECIAL
RETURN
- 18 -
Digital Day/Night Internal Dome Camera
DC
ATW
OFF
AUTO
COLOR
OFF