Managing User Passwords; Managing Logs Of The Bm635 - Huawei EchoLife BM635 User Manual

5 Managing the BM635

5.1 Managing User Passwords

A user password is used to allow a user to set network parameters. The password is
classified into two levels: admin and user. After the admin user log in to the BM635, you
can modify the two level passwords and must keep the new password in mind.
If you forget the password, you can restore factory settings of the BM635 to validate the
initial password or contact the local carrier.
Perform the following steps to modify a user password:
Step 1
In the navigation tree, choose Maintain > Account, and then click the Account tab.
Step 2
Select a user name from Username.
Step 3
Enter the user information follow the prompts.
Note:
To change an admin password, you need to enter the original password and you cannot change the
user name.
To change a user password, you are not required to enter the original password and you can change
the user name.
Step 4
Click Apply.
-----End

5.2 Managing Logs of the BM635

After you enable log management of the BM635, the BM635 starts to record the events
of the specified log type. You can check various levels of system logs in real time.
Starting Log Management
Step 1
In the navigation tree, choose Maintain > LOG, and then click the LOG tab.
Step 2
Select Enable to enable log management.
Step 3
Select a log level from the Log Level.
After you select a log level, the system displays the information on the logs at and below this
level. For example, after you select Error from Log Level, the system records the information
on the logs at Error, Critical, Alert, and Fatal levels.
Step 4
Click Apply.
----End
Checking Logs
Step 1
In the navigation tree, choose Maintain > LOG, and then click the LOG Display tab.
Step 2
Select a log level from Display Level.
5-2 Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd
EchoLife BM635
User Guide
Issue 01 (2008-06-15)