Wired Remote Controller-Buttons And Display - Samsung AVMDH052CA0 Owner's Instructions Manual

Wired Remote Controller-Buttons and Display

The wired remote controller is an optional accessory and it is installed on the wall.
To use the wired remote controller, refer to an appropriate manual.
(Except Cooling Only Models)
Communication error indicator
On Timer setting
Off Timer setting
Test indicator
Temperature adjustment
On Timer button
Off Timer button
Test button
N N o o t t e e
N N o o t t e e
8
E-
Removing frost indicator
buttons
- Test button is for your installation specialist. You must NOT press it.
- After cleaning the air filter, press the filter reset button. Then the wired remote
controller will display the FILTER SIGN indicator when the time to clean the air filter;
refer to page 12 or 13.
- Duct type air conditioner does not have function of adjusting air flow direction.
Therefore, the function is not operated even if you press the swing button.
- The heating mode( ) is not selected in cooling only models.
Operating mode
Centralized controller indicator
(In case of installing the Centralized controller)
Mode selection button
Temperature setting
Fan speed
Air flow direction
Filter Sign indicator
On/Off & Timer
Set/Cancel button
On/Off indicator
Fan speed adjustment
button
Swing button
(Not operated)
Filter Reset button