Entone Amulet User Manual page 35

High definition television receiver

Hide thumbs Also See for Amulet:

Amulet High Definition Television Receiver User's Guide

In "RF TV", channel 10 is used by default.

You can change the channel ID by using the User Menu.

Follow procedures in section Using User Menu, to make the changes.

NOTE: The new channel ID will only take effect after rebooting the Amulet.

You can use User Menu to set the HDMI and Component output resolution. You can also use the Amulet

front panel "UP" arrow to set the resolution. The setting made in both ways is the same.

To use User Menu to set the output resolution, follow procedures in section Using User Menu, to make the

changes.

Please refer to section Setting HDMI and Component Output Resolution for details of setting resolution.

You can use User Menu to control closed captioning. You can also use remote control "LANG" button to

control closed captioning. The setting made in both ways is the same.

To use User Menu to set closed captioning, follow procedures in section Using User Menu, to make the

changes.

Please refer to section Closed Captioning for details of controlling closed captioning.

You can use User Menu to control the fan speed or turn off the fan at all. 3 fan speeds; high, middle and low

are provided. You can control the fan speed with fan noise level which is acceptable to you. To ensure good

heat dissipation, it is not recommended to turn off the fan.

Follow procedures in section Using User Menu, to make the changes.