Page 1
Amulet High Definition IP Television Receiver User‘s Guide (North America Edition) P/N: 95-83xxxx-06 V1.7...
Page 2
THE COPYRIGHT OWNER OF THE MATERIALS TO AVOID VIOLATING THE LAW WHICH COULD RESULT IN DAMAGES OR OTHER REMEDIES. TRADEMARKS Entone and the tagline “Connecting the Home” are trademarks of Entone, Inc. All other trademarks or registered trademarks belong to their respective owners. CHANGES The material in this document is for information only and is subject to change without notice.
Remote Controls ............................... 21 LOADING BATTERIES ............................21 CONTROLLING THE AMULET USING IR ......................22 CONTROLLING YOUR TELEVISION AND OTHER A/V DEVICES ..............22 Specifications ................................23 Troubleshooting the Amulet ............................. 25 Copyright 2010 Entone, Inc. All rights reserved...
Increase the separation between the equipment and the receiver. Connect the equipment to a different circuit from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Copyright 2010 Entone, Inc. All rights reserved...
Page 5
Low voltage Directive 73/23/EEC Entone products are designed and tested to meet IEC60065, the standard for the Safety of Information Technology Equipment. This is the international standard for these types of products to reduce the risk of product damage and of personal injury.
Page 6
This precaution may be particularly important in rural areas. CAUTION: Users should not attempt to make such connections themselves, but should contact the appropriate electrical inspection authority, or electrician, as appropriate. Copyright 2010 Entone, Inc. All rights reserved...
Connecting Amulet to the network Powering Amulet Using the Remote Controls Troubleshooting For a full listing of all of the topics covered in this User‘s Guide, see the Table of Contents. Copyright 2010 Entone, Inc. All rights reserved...
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects Copyright 2010 Entone, Inc. All rights reserved...
Page 9
For PLUGGABLE EQUIPMENT, the socket-outlet shall be installed near the equipment and shall be easily accessible. Changes or Modifications not expressly approved by the party responsible could void the user‘s authority to operate this device. Copyright 2010 Entone, Inc. All rights reserved...
Component Video output (Y) VIDEO Composite video VIDEO P Component Video output (P AUDIO LEFT Composite audio output (channel left) 10. VIDEO P Component Video output (P 11. AUDIO RIGHT Composite audio output (channel right) Copyright 2010 Entone, Inc. All rights reserved...
Page 12
S/PDIF digital optical audio TOSLINK output 14. S-VIDEO S-Video output 15. HDMI HDMI output 16. USB USB connector 17. ETHERNET RJ45 plug for connecting to ADSL modem or network access equipment 18. DC DC power jack Copyright 2010 Entone, Inc. All rights reserved...
28. EXIT Exits the current menu item. 29. CH UP/DOWN Changes channel up or down. 30. LAST Changes channel to the most recently viewed channel. 31. CC Toggles closed captioning on or off. Copyright 2010 Entone, Inc. All rights reserved...
Amulet Introduction ABOUT THE AMULET HIGH DEFINITION IP TELEVISION RECEIVER Amulet High Definition IP Television Receiver is one of Entone‘s line of cost-effective and compact high- definition Customer Premise Equipment (CPE) solutions. Amulet is a multi-functional IPTV receiver with MPEG-4 (AVC/H.264) HD capabilities that integrates easily with popular home-networking and broadband services.
The HDMI output jack is fully compliant to HDMI 1.3 specifications. HDMI and component video output support high definition video signal. They will provide the best quality video signal for HD ready TV sets. Copyright 2010 Entone, Inc. All rights reserved...
Most TVs use either a physical switch located on the rear of the TV or with on-screen programming to configure to use CATV. Consult your TV owner‘s manual for instruction if required. Copyright 2010 Entone, Inc. All rights reserved...
6. You should now see the output from the Amulet on your TV screen. Figure 4-7 Connecting TV using RCA Composite Video/Audio Figure 4-8 Connecting Primary TV using S-Video and Composite Audio Copyright 2010 Entone, Inc. All rights reserved...
Be sure to use an HDMI cable with the HDMI logo. If your TV does not support multi-channel audio, the Amulet will output PCM audio only. Please refer to the next section to set the Component and HDMI output resolution. Copyright 2010 Entone, Inc. All rights reserved...
If your connected TV or A/V equipment does not support AC-3, you can disable AC-3. Enabling or disabling AC-3 is controlled by the IPTV middleware. For details of enabling and disabling AC- 3, please refer to usage instruction provided by your service operator. Copyright 2010 Entone, Inc. All rights reserved...
1. Connect the external hard drive using eSATA cable. 2. The eSATA hard drive requires separate power supply. Connect the eSATA hard drive power supply to the power source. Figure 6-1 Connecting eSATA hard drive Copyright 2010 Entone, Inc. All rights reserved...
―RECORD‖ LED indicator will illuminate only if the (DVR) is enabled and recording assets to the hard disk drive is in progress. (Please refer to your middleware or service provider about the DVR functionality) Copyright 2010 Entone, Inc. All rights reserved...
Page 22
5. Within 60 seconds splash screen will appear on the TV. Figure 7-4 Amulet Boot-up Splash Screen 6. The total boot-up time may vary depending on the middleware application and the service provider environment. Copyright 2010 Entone, Inc. All rights reserved...
3. Put the new batteries in. Make sure you match the plus ( ―+‖ ) ends with the plus markings on the battery case. 4. Slide the cover back into place. Figure 8-1 Loading Batteries to Remote Control Copyright 2010 Entone, Inc. All rights reserved...
You must point the remote control directly at these devices, with no objects blocking the line of sight. For details of how to program the Amulet remote controls and the supported devices, please refer to the Amulet Quick Reference Guide or URC 4 User’s Guide. Copyright 2010 Entone, Inc. All rights reserved...
MPEG (ISO/IEC-11172-3) down mixed to 2 channel PCM analog stereo Closed Captioning EIA-608 Captioning format – ATSC, SCTE Connectors 1 x RF TV type-F connector for 1 modulated channel 1 x RCA composite video output 1 x RCA composite audio output Copyright 2010 Entone, Inc. All rights reserved...
Page 26
Relative Humidity non-condensing Regulatory compliance UL/cUL, CE (pending), FCC part 15, FCC part 68 Security controls Anti-Taping Macrovision (optional) Parental Controls Provided through middleware partner integration NOTE: Above specification for reference only. Copyright 2010 Entone, Inc. All rights reserved...
No sound Audio System the correct input in your device. Is the volume of the device turned down to the minimum level? If HDMI or component is used. Try disabling Copyright 2010 Entone, Inc. All rights reserved...
Page 28
TV possible that some TVs may not operate popping noise properly with Amulet. In case of problem, use on HDMI component video output and composite audio output to connect your primary TV. Copyright 2010 Entone, Inc. All rights reserved...