Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Entone Hydra HD
Summary of Contents for Entone Hydra HD
- Page 1 Configuring the Tivo for Use With Entone’s Hydra HD Setup Guide...
- Page 2 The material in this document is for information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, Entone, Inc. assumes no liability resulting from the use of the information contained herein.
- Page 3 Entone HydraHD Advanced Setting for Channel Changing with TiVo IR Control Step 1 Use the Entone’s remote control, press “INPUT” and then “MENU” in sequence within 1 second. This will allow you to enter into the user menu, under TiVo IR KeyCode select MAGNAVOX 10024-B or CENTURION 00092-B.
- Page 4 Step 4 Select MAGNAVOX or CENTURION (the brand that selected in Step1 from Entone User Menu need to be match with TiVo selection below). Step 5 Make sure the IR cable is connected to the Hydra properly (please refer to the Tivo documentation for proper connection) and select OK, I’m sure the IR cable is hooked up correctly.
- Page 5 Step 9 On the Channel Changing Tests screen, you should now see the phrase “Press ENTER for advanced setup” at the bottom of the screen. Press the ENTER key on your remote. Step 10 You will now see the Cable Channel Changing Advanced Setup screen. Highlight IR Code and press SELECT.
- Page 6 Step 12 On the next screen, select 10024-B for MAGNAVOX or 00092-B for CENTURION. Step 13 Once you have selected a code, select Use these settings. You should now be able to change channels using IR control.
Need help?
Do you have a question about the Hydra HD and is the answer not in the manual?
Questions and answers