Bunn Single GPR DBC-DV Installation & Operating Manual page 9

With smart funnel dual voltage model

Hide thumbs Also See for Single GPR DBC-DV:

Table of Contents

1. The use of a damp cloth rinsed in any mild, nonabrasive, liquid detergent is recommended for cleaning all

surfaces on Bunn-O-Matic equipment.

2. Check and clean the sprayhead. Use the pointed end of sprayhead cleaning tool (#38227.0000) to remove

any mineral deposits from the sprayhead holes.

3. Insert the long end of sprayhead cleaning tool into the sprayhead fitting, and rotate several times to remove

any mineral deposits from the fitting.

4. Insert the short end of sprayhead cleaning tool into the bypass fitting, and rotate several times to remove

any mineral deposits from the fitting.

NOTE: In hard water areas, this may need to be done daily. It will help prevent liming problems in the brewer

and takes less than a minute.

CLEANING

Page 9

37994.1 031512

Table of Contents

Show Quick Links

Table of Contents