3. Operation Notice:
Please read and follow the following safety instructions carefully. Improper
operation may result in fire, electrical shock, personal injury, or projector damage.
Warning: Do not cover the lens while the lamp is lit.
Warning: To prevent eye injury, do not look directly into the projector lens.
Warning: Make sure that you provide adequate ventilation for the
projector. Do not block the ventilation holes in the case
Warning: To prevent electrical shock, never open the projector case.
Warning: Before using, please make sure that the power cord is connected
to an AC receptacle with a protective safety ground terminal.
Warning: Before replacing the lamp, turn the projector off and unplug the
power cord. To avoid burns, wait 1 hr before opening the lamp
door. Refer to page 24 for lamp replacement instructions.
Warning: Always use the power cord provided, and a receptacle with a
protective safety ground terminal.
Warning: Do not place any drinks on top of your projector. Spilled liquids
may damage the projector.
Warning: Do not place the projector on a hot surface, moisture or in direct
sunlight.
Warning: Handle carefully during transportation. Avoid dropping the
projector.
3
Need help?
Do you have a question about the Projector and is the answer not in the manual?