Channel Add/Delete - Samsung CS29Z45 Owner's Instructions Manual

◆ Programme (Programme number to be assigned to a
channel)
◆ Colour System: AUTO/PAL/SECAM/NTSC4.43/
NTSC3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
Channel (When you know the number of the channel to
◆
be stored):
➢ You can also select the channel number directly by
pressing the numeric buttons (0-9).
Store (When you store the channel and associated
◆
programme number)
➢ If there is no sound or abnormal sound, re-select the
sound standard required.
☛ Channel mode
◆ P (Programme mode): When completing tuning,
the broadcasting stations in your area have been
assigned to position numbers from P00 to P99. You
can select a channel by entering the position number
in this mode.
◆ C (Real channel mode): You can select a channel
by entering the assigned number for each air
broadcasting station in this mode.
◆ S (Cable channel mode): You can select a channel
by entering the assigned number for each cable
channel in this mode.
Channel - Add/Delete
You can exclude channels you
TV
have chosen from the channels
More

P  : Added
you scanned. When you scan
P 2 : Added
through the stored channels,
P 3 : Added
P 4 : Added
those you have chosen to
P 5 : Added
skip are not displayed. All of
More

the channels that you did not
Move
specifically choose to skip are
displayed during scanning.
Method:
ENTER : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
◄/►: You can obtain a sharp
and clear picture and good
sound quality.
▲/▼ ➜ ENTER : You can reset
the setting.
MENU : You can memorise
adjusted picture or sound.
Channel - Channel Grouping
You can choose your category
and find your desired channel
in a few seconds. You can save
a channel under the following
categories-Movie, Music, News,
Sports, and User.
Method:
▲/▼ : Used to select a
Programme.
◄/► : Used to select the desired
channel group.
▲/▼ : Used to confirm the new
choice.
➢ You can press  to select Channel Group(All, Movie,
Music, News, Sport, User) directly.
➢ You can also use the EZ.view key to use this function.
Setup - Time
Add/Delete
Clock
◆
You can set the television
clock so that the current
time is displayed when
Enter Return
pressing the INFO button on
the remote control.
You must also set the time if
you wish to use the automatic on or off timers.
➢ When pressing the "I" button (On/Off) on the front (or
side) of the television, the clock setting will be reset.
Fine Tune
P  0
Reset
Move Save
Adjust
Return
Channel Grouping
TV
Group Select : Sport

Set Channel Group

Move Adjust Return
Set Channel Group
Movie Music News Sport User
P 
P 2
P 3
P 4
P 5
P 6
P 7
P 8
Move Adjust Return
TV Time
  : 0 0 a m
Clock
Sleep Timer : Off
Scheduler

Move Enter Return
continued...
English - 4
◆ Sleep Timer
You can select a time period of between 30 and 180
minutes after which the TV automatically switches to
standby mode.
Scheduler
◆
TV
You can set the scheduler
P On Time
to make the TV return to
. -- -- : -- am -- : -- am No
a particular channel at a 2. -- -- : -- am -- : -- am No
3. -- -- : -- am -- : -- am No
pre-set time.
4. -- -- : -- am -- : -- am No
5. -- -- : -- am -- : -- am No
➢ Upto 5 Programmes can
On Timer Volume
be scheduled at a time.
Move
➢ If the Clock is not set in the Time menu, a pop-up
warning will flash if user tries to enter Scheduler.
On Timer Volume
◆
Ther preferred volume can be set for when the timer
automatically turns on the TV.
Method:
◄/► : Move to the hour, minute or am/pm.
▲/▼ : Used to set hour, minute or am/pm.
▲/▼, ENTER : S et option of YES/NO to activate/deactivate
the operation.
☛ The function can be used to the preset channel only.
☛ Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer "On" mode and prevents overheating, which may
occur if a TV is on for too long.
Setup - Child Lock
This feature allows you to
TV
prevent unauthorized users,
Child Lock
Programme
such as children, from watching
Lock
unsuitable programmes by
muting out video and audio.
Child Lock cannot be released
using front (or side) panel
Move
buttons. Only remote control can
release the Child Lock setting, so keep the remote control
away from children.
Scheduler
Off Time Set
0
Enter Return
Child Lock
: On

: P 
: ?
Enter Return
continued...