Channel Add/Delete - Samsung CS21Z45 Owner's Instructions Manual

Input - Source List
(depending on the model)
You can switch between viewing
TV
signal from connected equipment,
TV
AV1
such as a VCR, DVD, set-top box,
AV2
and the TV source (broadcast or
Component
cable).
➢
You can change the required
Move
source simply by pressing
the SOURCE button on the
remote control. It might take a short period of time for
pictures to be switched.
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
program numbers may not correspond to actual or desired
program numbers. However you can sort numbers manually
and clear any channels you do not wish to watch.
Channels are sorted and stored
in the order which reflects their P 1
position in the frequency range
(with lowest first and highest last).
The program originally selected is
Enter
then displayed.
➢
To stop the search before it has finished, press the ENTER
button.
When finished, the Sort menu is displayed. To sort the stored
channels into the desired numerical order, refer to "Channel -
Sort" on page 4.
To exit without sorting, press the EXIT button.
Channel - Sort
Source List This operation allows you to
change the program numbers of
stored channels.
This operation may be necessary
after using auto store.
Enter Return
 From : Channel number to be
changed.
 To : New channel number to be identified.
 Store : Confirmation the exchange of channel numbers.
Channel - Manual Store
You can store channels, including
those received via cable networks.
When storing channels manually,
you can choose:
– Whether or not to store each of
the channels found
– The program number of each
stored channel which you wish
Search
to identify
102MHz
7 %
 Program (Program number to be assigned to a channel)
Stop
 Color System : AUTO / PAL / SECAM / NTSC4.43 /
Return
 Sound System : BG / DK / I / M
 Search (When you do not know the channel numbers)
The tuner scans the frequency range until the first channel
or the channel that you selected is received on the screen.
 Store (When you store the channel and associated
program number)
➢
If there is no sound or abnormal sound, re-select the
sound standard required.
Sort
TV
From : P 1
To : P--
Store : ?
Move Adjust Return
Manual Store
TV
Program : P 3
Color System : AUTO
►
Sound System : BG
►
Search : 46MHz
Store : ?
Move Adjust Return
NTSC3.58
English - 4
Channel - Add/Delete
You can exclude channels you
TV
have chosen from the channels ▲ More
P 1 : Added
you scanned. When you scan
P 2 : Added
through the stored channels,
P 3 : Added
P 4 : Added
those you have chosen to skip are
P 5 : Added
not displayed. All of the channels
▼ More
that you did not specifically
Move
choose to skip are displayed
during scanning.
Method:
ENTER : Select Added or Deleted
Channel - Fine Tune
If the reception is clear, you do
not have to fine-tune the channel,
P 1
as this is done automatically
during the search and store
operation. If however the signal is
Move
Adjust
weak or distorted, you may have
to fine-tune the channel manually.
Method:
◄/► : You can obtain a sharp and clear picture and good
sound quality.
▲/▼  ENTER : You can reset the setting.
ENTER : You can memorise adjusted picture or sound.
Channel - LNA
(depending on the model)
When a weak broadcast signal TV
Auto Store
causes an unclear, noisy picture,
Manual Store
the "LNA" feature improves
Add/Delete
Fine Tune
the picture quality by setting to
Sort
"On". If you experience noise
LNA
on a certain noise on a certain
channel, set the the "LNA" to
Move
"On" or "Off" for this channel, to
obtain the optimum picture.
Method:
ENTER : On/Off
Add/Delete
Enter Return
Fine Tune
0
Reset
Save
Return
Channel
►
►
►
►
►
: On ►
Enter Return