Channel Add/Delete - Samsung CS29Z45 Owner's Instructions Manual

Channel - Manual Store
You can store channels,
including those received via
cable networks. When storing
channels manually, you can
choose:
- Whether or not to store each
of the channels found.
- The programme number of
each stored channel which you wish to identify.
◆ Programme (Programme number to be assigned to a
channel)
◆ Color System: AUTO/PAL/SECAM/NTSC4.43/
NTSC3.58
◆ Sound System: BG/DK/I/M
◆ Search (When you do not know the channel numbers):
The tuner scans the frequency range until the first
channel or the channel that you selected is received on
the screen.
➢ You can also select the channel number directly by
pressing the numeric buttons (0-9).
◆ Store (When you store the channel and associated
programme number)
If there is no sound or abnormal sound, re-select the
➢
sound standard required.
AA68-04048J-Eng.indd 4
All manuals and user guides at all-guides.com
Channel - Add/Delete
You can exclude channels you
Manual Store
TV
have chosen from the channels
Programme : P 3
Color System : AUTO

you scanned. When you scan
Sound System : BG

through the stored channels,
Search : 46MHz
Store : ? those you have chosen to
skip are not displayed. All of
the channels that you did not
Adjust
Move Return
specifically choose to skip are
displayed during scanning.
Method:
ENTER : Select Added or Deleted.
Channel - Fine Tune
If the reception is clear, you do not have to fine-tune the
channel, as this is done automatically during the search and
store operation. If however the signal is weak or distorted,
you may have to fine-tune the channel manually.
Method:
◄/►: You can obtain a sharp
and clear picture and good
sound quality.
▲/▼ ➜ ENTER : You can reset
the setting.
ENTER : You can memorise
adjusted picture or sound.
Add/Delete
TV
More

P 1 : Added
P 2 : Added
P 3 : Added
P 4 : Added
P 5 : Added
More

Move Enter Return
Fine Tune
P 1 0
Reset
Move
Save
Adjust Return
English - 4
Setup - Time
 Clock
TV
You can set the television
Clock
On Timer - - : - - a m Off
clock so that the current time
Off Timer - - : - - a m Off
is displayed when pressing
the INFO button on the
remote control. You must
also set the time if you wish
Move
to use the automatic on or
off timers.
➢ W hen pressing the " P " button (On/Off) on the front
(or side) of the television, the clock setting will be
reset.
 On Timer / Off Timer
You can set the On/Off timers so that the television will
switch on or off automatically at the time you select.
☛
You must set the clock first.
☛ Auto Power Off
When you set the timer "On", the TV will eventually turn
off, if no controls are operated for 3 hours after the TV
was turned on by timer. This function is only available in
timer "On" mode and prevents overheating, which may
occur if a TV is on for too long.
Time
1 2 : 0 0 a m
Enter Return
2009-12-07 6:2