Viewing The Menus; Source List - Samsung CS29Z45 Owner's Instructions Manual

Viewing the Menus

 Press the MENU button.
The main menu is displayed on the screen. Its left side
has five icons: Input, Picture, Sound, Channel, and
Setup.
2 Press the ▲ or ▼ button to select one of the icons.
Press the ENTER button to access the icon's sub-menu.
3 Press the ▲ or ▼ button to move to items in the menu.
Press the ENTER button to enter items in the menu.
4 Press the ▲/▼/◄/► button to change the selected
items. Press the MENU button to return to the previous
menu.
5 Press the EXIT button to exit from the menu.
Setup - Plug & Play
When the television is initially powered on, several basic
customer settings proceed automatically and subsequently.
The following settings are available.
 If the television is in standby
mode, press the POWER
button on the remote control.
Enter
The Start Plug & Play is
displayed. To start Plug
& Play, press the ENTER
button. The Language Language
English
menu is displayed.
Indonesia
➢ The Language menu
Melayu
will automatically appear
after several seconds,
even if the ENTER
Move
button is not pressed.
2 Select the appropriated
language by pressing the
▲ or ▼ button. Press the Check antenna input.
ENTER button. The Check
Enter
antenna input. is displayed.
➢ If any language is not selected, the language menu
will disappear about 30 seconds later.
3 Make sure that the antenna
is connected to the
Area
television (refer to page 1).
Asia/W.Europe
CIS/E.Europe
Press the ENTER button.
China
The Area menu is displayed.
Hong Kong/UK
Australia
NZL/Indonesia
continued...
Move
4 Press the ▲ or ▼ button to select your area. Press the
ENTER button.
5 To search the channels,
press the ENTER button. To
stop the search, press the
ENTER button.
When the channel searching
has finished, the Clock Set
menu is displayed.
6 Press the ◄ or ► button to
move to the hour or minute.
Set the hour or minute by
pressing the ▲ or ▼ button.
7 When you have finished,
press the MENU button.
The Enjoy your watching.
is displayed, and then the
channel which has been
stored will be activated.
Plug & Play
Start Plug & Play.
Re-setting the Plug & Play
OK
Method:
Return
MENU ➜ ▲/▼ (Setup) ➜
ENTER ➜ ▲/▼ (Plug & Play)
Plug & Play
➜ ENTER
Input
(depending on the model)
Enter Skip

Source List

Plug & Play
Source List
◆
You can switch between
OK
viewing signal from
Skip
connected equipment,
such as a VCR, DVD, set-
top box, and the TV source
(broadcast or cable).
Plug & Play
➢ Y ou can change the required external source simply
by pressing the SOURCE button on the remote
South Africa
America
control. It might take a short period of time for
pictures to be switched. To return to the TV mode,
press the TV button on the remote control.
Enter Skip
Plug & Play
Auto Store
Start
Enter Skip
Plug & Play
Auto Store
P  C-- 02MHz
7 %
Stop
Enter Skip
Plug & Play
Clock Set   : 0 0 am
Move Enter
Adjust
Skip
Enjoy your watching.
OK
TV Setup
Plug & Play

Language : English

Time

Child Lock

Blue Screen : On

Melody : On

Music Mode : Off

Move Enter Return
-
Source List
TV
TV
AV
AV2
S-Video
Component
Move Enter Return
English - 3
Channel - Auto Store
You can scan for the frequency ranges available to you (and
availability depends on your country). Automatically allocated
programme numbers may not correspond to actual or desired
programme numbers. However you can sort numbers
manually and clear any channels you do not wish to watch.
Channels are sorted and stored
TV
in the order which reflects their
Area
Search
position in the frequency range
(with lowest first and highest
last). The programme originally
selected is then displayed.
➢ To stop the search before
Move
it has finished, press the
ENTER button.
When finished, the Sort menu
P  C--
is displayed. To sort the stored
channels into the desired
numerical order, refer to
Enter
"Channel - Sort". To exit without
sorting, press the EXIT button.
Channel - Sort
This operation allows you to
TV
change the programme numbers
From
To
of stored channels. This
Store
operation may be necessary
after using auto store.
From: Channel number to
◆
Move
be changed.
To: New channel number to be identified.
◆
Store: Confirmation the exchange of channel numbers.
◆
Channel - Manual Store
You can store channels,
TV
including those received via
Programme
Colour System
cable networks. When storing
Sound System
channels manually, you can
Search
choose:
Channel
Store
- W hether or not to store each
of the channels found.
Move
- T he programme number of
each stored channel which you wish to identify.
Auto Store
: Belgie
Asia/W.Europe
CIS/E.Europe
China
Hong Kong/UK
Australia
NZL/Indonesia
South Africa
America
Enter Return
Search
02MHz
7 %
Stop
Return
Sort
: P 
: P--
: ?
Adjust
Return
Manual Store
: P 3
: AUTO

: BG

: 46MHz
: C 4
: ?
Adjust
Return
continued...