Acer AcerPower F2 Service Manual page 28

Product Information
The screen below appears if you select Product Information from the main menu:
The Product Information menu contains general data about the system, such as the product name, serial
number, BIOS version, etc. These information is necessary for troubleshooting (maybe required when asking
for technical support).
The following table describes the parameters found in this menu:
Parameter
Product Name
System S/N
Main Board ID
Main Board S/N
System BIOS Version
SMBIOS version
20
Displays the model name of your system.
Displays your system's serial number.
Displays the main board's identification number.
Displays your main board's serial number.
Specifies the version of your BIOS utility.
The System Management Interface (SM) BIOS allows you to check your system
hardware components without actually opening your system. Hardware checking
is done via software during start up. This parameter specifies the version of the
SMBIOS utility installed in your system.
Description
Chapter 2