Using The Subwoofer Button; Listening To The Radio - Samsung HW-D600 User Manual

✎
NOTE

Channel status displays are dependent on the speaker confi guration.

SFE mode works with 2-ch signals.

If Dolby Pro Logic IIz is set to On, the Surround Back speaker(SBL/SBR) is changed to the Front
Height Speaker(FHL/FHR), Dolby true HD, Dolby plus, DTS-HD Audio ,SFE and NE0:6 will be
output 5.1 channel.

ProLogic IIx and ProLogic IIz works only audio signals with sampling frequencies of 32KHz,
44KHz or 48KHz.
You can set the subwoofer Level.
1. Press the SUBWOOFER button.
2. Press the ◄ ► buttons to select Subwoofer LEVEL under the
Display with S.W. (The display disappears automatically.)
- Setting the Subwoofer Level-
•
SW (Subwoofer) : -10 ~ +10dB
You can listen to the radio by using either automatic or manual tuning.
1. Press the INPUT SELECT button on the remote control to select FM.
2. Select a frequency (radio broadcast).
•
Preset tuning :
Press the #,$ buttons on the remote control to select the preset frequency.
•
Manual tuning 1 (Automatic tuning):
Press and hold the TUNING/CH ( .,, ) buttons on the remote control to automatically tune in
a frequency.
•
Manual tuning 2 :
Press the TUNING/CH ( .,, ) buttons on the remote control to increase or decrease the
frequency step by step.
✎
NOTE

You can also use the SELECT (.,,) button on the main uint to change the radio frequency.
HW-D600_D650S_XAC_0614.indd 47 HW-D600_D650S_XAC_0614.indd 47

Using the SUBWOOFER button

Listening to the Radio

47
English
2011-06-17 2011-06-17 10:35:27 10:35:27