Table of Contents
Advertisement
ENG
14
Plug and Play
When the television is initially powered ON, several basic customer
settings proceed automatically and subsequently. The follwing
settings are available.
1
If the television is in Standby mode, press the POWER button (
on the remote control.
Result:
The message Plug & Play is displayed. It flickers for
a little while, and then the Language menu is
automatically displayed.
2
Select the appropriate language by moving the joystick up or
down.
3
Press the joystick button (
Result:
The message Antenna input check is displayed.
4
Make sure that the antenna is connected to the TV, and then
press the joystick button (
Result:
The Country (or Area) menu is displayed; (depending
on the model).
5
Select your country (or area) by moving the joystick up or down.
6
Press the joystick button (
Result:
The ATM (or Auto store) menu is displayed;
(depending on the model).
7
To start the search, press the joystick button (
Result:
The search will end automatically. Channels are sorted
and stored in an order which reflacts their position in
the frequency range, (with lowest first and highest last).
The programme originally selected is then displayed.
To stop the search before it has finished or return to normal
viewing, press the TV button (
8
When it has finished, the message Enjoy viewing your new TV
is displayed, and then the channel which has been stored will be
activated.
) to confirm your choice.
).
) to confirm your choice.
).
).
)
Hide quick links:
Advertisement
Table of Contents
